Your Cart

Westermo ODW-710-F2 PROFIBUS to Fiber Converter

Westermo ODW-710-F2 PROFIBUS to Fiber Converter
Westermo ODW-710-F2 PROFIBUS to Fiber Converter
Westermo ODW-710-F2 PROFIBUS to Fiber Converter
Westermo ODW-710-F2 PROFIBUS to Fiber Converter
Westermo ODW-710-F2 PROFIBUS to Fiber Converter
Westermo ODW-710-F2 PROFIBUS to Fiber Converter
Westermo ODW-710-F2 PROFIBUS to Fiber Converter
Westermo ODW-710-F2 PROFIBUS to Fiber Converter
Westermo ODW-710-F2 PROFIBUS to Fiber Converter

  • Ring / Multidrop Fibre Converter PROFIBUS
  • 1 x PROFIBUS Port (9 600 bit/s – 12 Mbit/s)
  • 2 x 100 Mbit/s SFP Slots (LC connector)
  • Up to 120 KM Typical data transmission distance on fiber
  • Compact housing with integral DIN rail clip
  • IP21-rated PC/ABS body material design
  • Dual 10 V to 60 VDC power input
  • -40 to +60°C operating temperature range

  • Operating Temperature (-40 to 60°C)
  • Relative Humidity (5% to 95% RH)
  • IP protection (IP21)
  • Shock (IEC 60068-2-27)
  • Vibration (IEC 60068-2-6)
  • Railway Transportation
  • Marine
$0.00
Ex Tax: $0.00

The ODW-710-F2 has been designed to allow the use of fibre optic cables on PROFIBUS DP networks. The design allows the use of a range of Westermo-verified SFP (Small Form Pluggable) transceivers, which can provide solutions with, for example, only a single fibre or distances up to 120 km. Both multidrop networks and redundant rings can be formed using a mixture of transceiver types.

This unit has been designed for industrial use where the requirement is for a long and reliable service life in a harsh environment. To ensure this reliable operation, we manufacture using the highest quality components. The ODW-710 can be used on all PROFIBUS DP networks to extend the operational network size beyond the normal constraints of the copper cable. All the data rates defined in EN 50170 are supported.

Large ring networks can be created to provide network resilience to guarantee system functionality even if a cable is damaged. The ring recovery time ensures that the network devices are not aware of the failure. The fault contact provides a method to communicate network failures.


You can also find the ODW-710-F1ODW-720-F2, and ODW-730-F2 models in the Fiber Optic Modems.


You can buy the Westermo ODW-710-F2 PROFIBUS to Fiber Converter online at a competitive price in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman). Enjoy the cost-effective shipping options at a specific time in your location.

converter : Interface
100Mb Fiber optic single mode (Megabit) Ports No
100Mb Fiber optic multi mode (Megabit) Ports No
Serial port Yes: 1 x PROFIBUS DP port (female 9-position D-sub)
USB No
Other ports Yes : 2 x 100 Mbit/s SFP Slots (LC connector)
Isolation Yes : To power and status ports
converter : Converter specifications
Data transfer speed ( Baudrate ) 9 600 bit/s – 12 Mbit/s
Maximum data transmission distance Up to 120 km (depending on SFP module and fiber type)
Minimum output power converter -
Sensitivity to receiving information -
Wavelength -
Require cable diameter -
Flow Control -
Protocols PROFIBUS DP
converter : Serial Signals
RS-232 Signals -
RS-422 Signals -
RS-485-2w Signals -
RS-485-4w Signals -
converter : Power Requirements
Power Consumption (Output Adapter) -
Power Input Plugin ( Redundant ) Yes
Overload Current Protection Supported
Reverse Polarity Protection Supported
Input Voltage 12 to 48 VDC and 24 VAC
Input Current 400 mA @ 12 VDC, 200 mA @ 24 VDC, 100 mA @ 48 VDC
Connector Detachable screw terminal
converter : General
Fan / Fanless Fanless
MTBF MIL HDBK-217K: 500,000 hours
converter : Physical Characteristics
Dimensions 34 x 122 x 123 mm (1.34 x 4.80 x 4.84 inches)
Housing PC/ABS
Installation Din-rail mounting
Operating Temperature -40 to +60°C (-40 to +140°F)
Operation Humidity 5-95% relative humidity
Standards and Certifications EMC: EN/IEC 61000-6-1, Immunity residential environments, EN/IEC 61000-6-2, Immunity industrial environments, EN/IEC 61000-6-3, Emission residential environments, EN/IEC 61000-6-4, Emission industrial environments; Trackside: EN 50121-4/IEC 62236-4, Railway signalling and telecommunications apparatus; Marine: DNV rules for classification - Ships and offshore units; Safety: UL/CSA 60950-1, IT equipment; IP21; MIL-HBDK-217F; Vibration: IEC 60068-2-6; Shock: IEC 60068-2-27
Storage Temperature -40 to +60°C (-40 to +140°F)
Weight 260 gr
converter : LED Indicators
LED Per Port Yes
Power Yes

Write a review

Note: HTML is not translated!
Rating
Bad Good
Captcha