Westermo ODW-730-F2 Serial to Fiber Converter
- Ring / Multidrop Fibre Converter RS-422/485
- 1 x RS-422/485 Port (300 bit/s – 1.5 Mbit/s)
- 2 x 100 Mbit/s SFP Slots (LC connector)
- Up to 120 KM Typical data transmission distance on fiber
- Compact housing with integral DIN rail clip
- IP21-rated PC/ABS body material design
- Dual 10 V to 60 VDC power input
- -40 to +60°C operating temperature range
.png)
Description
The ODW-730-F2 has been designed to allow the use of fiber optic cables on RS-422/485 networks. The design allows the use of a range of Westermo-verified SFP (Small Form Pluggable) transceivers, which can provide solutions with, for example, only a single fibre or distances up to 120 km. Both multidrop networks and redundant rings can be formed using a mixture of transceiver types. This unit has been designed for industrial use where the requirement is for a long and reliable service life in a harsh environment. To ensure this reliable operation, we manufacture using the highest quality components.
The ODW-730 draws on Westermo’s many years of knowledge of serial protocols and can be used on both synchronous and asynchronous data streams. The switch-selectable termination circuit saves the need for external terminating resistors. Large ring networks can be created to provide network resilience to guarantee system functionality, even if a cable is damaged. The ring recovery time ensures that the network devices are not aware of the failure. The fault contact provides a method to communicate network failures.
You can also find the ODW-730-F1, ODW-710-F2, and ODW-720-F2 models in the Fiber Optic Modems.
Discover industrial automation solutions appropriate to your needs and easily inquire about the Westermo ODW-730-F2 Serial to Fiber Converter through our user-friendly website via one of our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).
Specification
| Interface | |
|---|---|
| 100Mb Fiber optic single mode (Megabit) Ports | |
| 100Mb Fiber optic multi mode (Megabit) Ports | |
| Serial port | : 1 x RS-422/485 port (4-position detachable screw terminal) |
| USB | |
| Other ports | : 2 x 100 Mbit/s SFP Slots (LC connector) |
| Isolation | : To power and status ports |
| Converter specifications | |
| Data transfer speed ( Baudrate ) | 300 bit/s – 1.5 Mbit/s |
| Maximum data transmission distance | Up to 120 km (depending on SFP module and fiber type) |
| Minimum output power converter | - |
| Sensitivity to receiving information | - |
| Wavelength | - |
| Require cable diameter | - |
| Flow Control | - |
| Protocols | Start-bit followed by 8-11 bits |
| Serial Signals | |
| RS-232 Signals | - |
| RS-422 Signals | - |
| RS-485-2w Signals | - |
| RS-485-4w Signals | - |
| Power Requirements | |
| Power Consumption (Output Adapter) | - |
| Power Input Plugin ( Redundant ) | |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
| Input Voltage | 12 to 48 VDC and 24 VAC |
| Input Current | 400 mA @ 12 VDC, 200 mA @ 24 VDC, 100 mA @ 48 VDC |
| Connector | Detachable screw terminal |
| General | |
| Fan / Fanless | Fanless |
| MTBF | MIL HDBK-217K: 500,000 hours |
| Physical Characteristics | |
| Dimensions | 34 x 122 x 123 mm (1.34 x 4.80 x 4.84 inches) |
| Housing | PC/ABS |
| Installation | Din-rail mounting |
| Operating Temperature | -40 to +60°C (-40 to +140°F) |
| Operation Humidity | 5-95% relative humidity |
| Standards and Certifications | EMC: EN/IEC 61000-6-1, Immunity residential environments, EN/IEC 61000-6-2, Immunity industrial environments, EN/IEC 61000-6-3, Emission residential environments, EN/IEC 61000-6-4, Emission industrial environments; Trackside: EN 50121-4/IEC 62236-4, Railway signalling and telecommunications apparatus; Marine: DNV rules for classification - Ships and offshore units; Safety: UL/CSA 60950-1, IT equipment; IP21; MIL-HBDK-217F; Vibration: IEC 60068-2-6; Shock: IEC 60068-2-27 |
| Storage Temperature | -40 to +60°C (-40 to +140°F) |
| Weight | 260 gr |
| LED Indicators | |
| LED Per Port | |
| Power | |
