Westermo ODW-710-F1 PROFIBUS to Fiber Converter
- Point-to-Point Fibre Converter PROFIBUS
- 1 x PROFIBUS DP 9 600 bit/s – 12 Mbit/s
- Brand: WESTERMO
- Product Code: ODW-710-F1
Description
The ODW-710-F1 has been designed to allow the PROFIBUS DP protocol to be transmitted point to point over a fiber optic link. The design allows the use of a range of Westermo-verified SFP (Small Form Pluggable) transceivers which can provide solutions with, for example, only a single fibre or distances up to 120 km.
This unit has been designed for industrial use where the requirement is for a long and reliable service life in a harsh environment. To ensure this reliable operation we manufacture using the highest quality components.
The ODW-710 can be used on all PROFIBUS DP networks to extend the operational network size beyond the normal constraints of the copper cable. All the data rates defined in EN50170 are supported.
The ODW is simple to install being small and with a simple integral DIN rail clip. The standard PROFIBUS DP connector plugs straight onto the 9-pin D-sub and the unit automatically detects the data rate so no configuration is needed.
The comprehensive LEDs provide a quick and easy way of detecting any network problems that may be encountered.
Easy World Automation offers the
easiest way to buy the Westermo ODW-710-F1 PROFIBUS to Fiber Converter in the Middle East (UAE (Dubai), KSA (Al Khobar,
Riyadh), and Oman) at the lowest price through online inquiring. Our sales
experts will contact you to fulfill all your industrial automation needs.
Specification
Converter specifications | |
---|---|
Data transfer speed | 0.3Kbps to 250Kbps |
Maximum data transmission distance | 120Km |
Minimum output power converter | -20dBm |
Sensitivity to receiving information | -35dBm, -34dBm, -31dBm |
Wavelength | 1550nm, 1310nm |
Power Requirements | |
Maximum power consumption | - |
Power Consumption (Output Adapter) | 24V DC, 0.15A |
Power Input Plugin ( Redundant ) | |
Standards and protocols | |
Point-to-point topology | - |
Ring topology | - |
RS-232 Signals | - |
RS-422 Signals | - |
RS-485-2w Signals | - |
Interface | |
10/100Mb RJ45 (Megabit) Ports | |
100Mb Fiber optic single mode (Megabit) Ports | |
10/100/1000Mb (Gigabit) POE Ports | |
100Mb Fiber optic multi mode (Megabit) Ports | |
10/100/1000Mb RJ45 (Gigabit) Ports | |
1000Mb SFP Fiber optic (Gigabit) Ports | |
100Mb SFP Fiber optic (Megabit) Ports | : 1 LC Duplex or LC Simplex port |
Number of 10/100Mb PoE port | |
USB | |
DSL | |
Serial port | : RS-485 Terminal |
Other ports | |
General | |
Fan / Fanless | |
MTBF | 500,000 hour |
Require cable diameter | - |
Physical Characteristics | |
Dimensions | 35x121x119mm |
Housing | - |
Installation | Din-rail |
Isolation | : RS-485 port and Terminal Status |
Operating Temperature | -40 to 70 ° C |
Operation Humidity | - |
Protection against excessive consumption | - |
Protection against reverse flow | - |
Standards and Certifications | EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 55022, EN 55024, FCC part 15 Class A, EN 50121-4, IEC 62236-4, EN 60950-1, IT equipment, EN 60079-0, EN 60079-15, EN 61000-4-2, IEC 61000-4-3, ENV 50204, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-9, EN 61000-4-11 , EN 61000-4-16 ,IP21 |
Storage Temperature | -40 to 70 ° C |
Weight | 0.26Kg |
LED Indicators | |
LED Per Port | |
Power | |
Package Checklist | |
Hardware installation guide | |
Power adapter | |
Power cable |