Westermo ODW-720-F1 Serial to Fiber Converter
- 1 xRS-232 port 300 bit/s – 250 kbit/s
- Point-to-Point Fibre Converter RS-232
- Brand: WESTERMO
- Product Code: ODW-720-F1
Description
The ODW-720-F1 has been designed to allow RS-232 protocols to be transmitted point-to-point over a fibre optic link. The design allows the use of a range of Westermo verified SFP (Small Form Pluggable) transceivers which can provide solutions with, for example, only a single fibre or distances up to 120 km.
This unit has been designed for industrial use where the requirement is for a long and reliable service life, in a harsh environment. To ensure this reliable operation we manufacture using the highest quality components.
The ODW-720 draws on Westermo’s many years of knowledge of serial protocols and can even transmit the RTS/CTS hardware controls if required.
The ODW is simple to install, being small, with a simple integral DIN rail clip. The unit is totally transparent to any data rate so no configuration is needed. The comprehensive LEDs provide a quick and easy way of detecting any network problems that may be encountered.
You can place an order for the Westermo ODW-720-F1 Serial to Fiber Converter, which is applicable in the Water & Wastewater industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
Converter specifications | |
---|---|
Data transfer speed | 0.3Kbps to 250Kbps |
Maximum data transmission distance | 120Km |
Minimum output power converter | -20dBm |
Sensitivity to receiving information | -35dBm, -34dBm, -31dBm |
Wavelength | 1550nm, 1310nm |
Power Requirements | |
Maximum power consumption | 30W |
Power Consumption (Output Adapter) | 24V DC, 1.3A |
Power Input Plugin ( Redundant ) | |
Standards and protocols | |
Point-to-point topology | - |
Ring topology | - |
RS-232 Signals | - |
RS-422 Signals | - |
RS-485-2w Signals | - |
Interface | |
10/100Mb RJ45 (Megabit) Ports | |
100Mb Fiber optic single mode (Megabit) Ports | |
10/100/1000Mb (Gigabit) POE Ports | |
100Mb Fiber optic multi mode (Megabit) Ports | |
10/100/1000Mb RJ45 (Gigabit) Ports | |
1000Mb SFP Fiber optic (Gigabit) Ports | : 1 LC Duplex or LC Simplex port |
100Mb SFP Fiber optic (Megabit) Ports | : 1 LC Duplex or LC Simplex port |
Number of 10/100Mb PoE port | |
USB | |
DSL | |
Serial port | : RS-232 terminal |
Other ports | |
General | |
Fan / Fanless | |
MTBF | 500,000 hour |
Require cable diameter | - |
Physical Characteristics | |
Dimensions | 35x121x119mm |
Housing | - |
Installation | Din-rail |
Isolation | : RS-232 port and Terminal Status |
Operating Temperature | -40 to 70 ° C |
Operation Humidity | - |
Protection against excessive consumption | |
Protection against reverse flow | |
Standards and Certifications | EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 55022, EN 55024, FCC part 15 Class A, EN 50121-4, IEC 62236-4, EN 60950-1, IT equipment, EN 60079-0, EN 60079-15, EN 61000-4-2, IEC 61000-4-3, ENV 50204, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-9, EN 61000-4-11 , EN 61000-4-16 |
Storage Temperature | -40 to 70 ° C |
Weight | 0.26Kg |
LED Indicators | |
LED Per Port | |
Power | |
Package Checklist | |
Hardware installation guide | |
Power adapter | |
Power cable |