Westermo ODW-730-F1 Serial to Fiber Converter
- Point-to-Point Fibre Converter RS-422/485
- 1 x RS-422/485 port 300 bit/s – 1.5 Mbit/s
- Brand: WESTERMO
- Product Code: ODW-730-F1
.png)
Description
The ODW-730-F1 has been designed to allow RS-422/485 protocols to be transmitted point-to-point over a fibre optic link. The design allows the use of a range of Westermo verified SFP (Small Form Pluggable) transceivers which can provide solutions with, for example, only a single fibre or distances up to 120 km.
This unit has been designed for industrial use where the requirement is for a long and reliable service life, in a harsh environment. To ensure this reliable operation we manufacture using the highest quality components.
The ODW-730 draws on Westermo’s many years of knowledge of serial protocols and can be used on both synchronous and asynchronous data streams. The switch selectable termination circuit saves the need for external terminating resistors.
The ODW is simple to install, being small, with a simple integral DIN rail clip. The unit is totally transparent to any data rate so no configuration is needed. The comprehensive LEDs provide a quick and easy way of detecting any network problems that may be encountered.
You can place an order for the Westermo ODW-730-F1 Serial to Fiber Converter, which is applicable in the Water & Wastewater industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| Converter specifications | |
|---|---|
| Data transfer speed | 0.3Kbps to 1500Kbps |
| Maximum data transmission distance | 120Km |
| Minimum output power converter | -20dBm |
| Sensitivity to receiving information | -35dBm, -34dBm, -31dBm |
| Wavelength | 1550nm, 1310nm |
| Power Requirements | |
| Maximum power consumption | 30W |
| Power Consumption (Output Adapter) | 24V DC, 1.3A |
| Power Input Plugin ( Redundant ) | |
| Standards and protocols | |
| Point-to-point topology | - |
| Ring topology | - |
| RS-232 Signals | - |
| RS-422 Signals | - |
| RS-485-2w Signals | - |
| Interface | |
| 10/100Mb RJ45 (Megabit) Ports | |
| 100Mb Fiber optic single mode (Megabit) Ports | |
| 10/100/1000Mb (Gigabit) POE Ports | |
| 100Mb Fiber optic multi mode (Megabit) Ports | |
| 10/100/1000Mb RJ45 (Gigabit) Ports | |
| 1000Mb SFP Fiber optic (Gigabit) Ports | |
| 100Mb SFP Fiber optic (Megabit) Ports | : 1 LC Duplex or LC Simplex port |
| Number of 10/100Mb PoE port | |
| USB | |
| DSL | |
| Serial port | : Terminal RS-422/485 |
| Other ports | |
| General | |
| Fan / Fanless | |
| MTBF | 500,000 hour |
| Require cable diameter | - |
| Physical Characteristics | |
| Dimensions | 35x121x119mm |
| Housing | - |
| Installation | Din-rail |
| Isolation | : RS-485 port and Terminal Status |
| Operating Temperature | -40 to 70 ° C |
| Operation Humidity | - |
| Protection against excessive consumption | - |
| Protection against reverse flow | - |
| Standards and Certifications | EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 55022, EN 55024, FCC part 15 Class A, EN 50121-4, IEC 62236-4, EN 60950-1, IT equipment, EN 60079-0, EN 60079-15 |
| Storage Temperature | -40 to 70 ° C |
| Weight | 0.26Kg |
| LED Indicators | |
| LED Per Port | |
| Power | |
| Package Checklist | |
| Hardware installation guide | |
| Power adapter | |
| Power cable | |
