MOXA CP-602U-I w/o Cable CANBUS UPCI Board
- Supports CAN 2.0A and CAN 2.0B
- Two independent CAN communication ports
- CAN transfer rate up to 1 Mbps
- 2 kV electrical isolation
- LED for transmit/receive status on each port
- Optional 120-ohm terminal resistor for CAN bus network
- DLL library and examples included
- Windows driver provided
- Brand: MOXA
- Product Code: CP-602U-I w/o Cable
Description
Moxa’s CP-602U-I CAN (Controller Area Network) interface board supports the Universal PCI interface. As a standalone CAN controller, the CP602U-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP-602U-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide bus arbitration and error detection. The -40 to 85°C wide operating temperature (CP-602U-I-T only) and 2 kV isolation make the boards suitable for use in harsh industrial environments.
You can also find the CP-602E-I w/o Cable model in the Protocol Converters.
Discover industrial automation
solutions appropriate to your needs, and easily inquire about the MOXA CP-602U-I w/o Cable CANBUS UPCI Board through
our user-friendly website via one of our Middle East branches (UAE (Dubai), KSA
(Al Khobar, Riyadh), and Oman).
Specification
SERIAL INTERFACE | |
---|---|
Nomber of Ports | 2 |
Connector | - |
Serial Isolation Protection | 2 kV |
SERIAL INTERFACE | |
Serial Standards | - |
CAN INTERFACE | |
Connector | DB9 male |
Nomber of Ports | 2 x CAN 2.0 A/B |
Baudrate | 10/20/50/125/250/500/800/1000 kbps, user-defined |
GENERAL | |
Standards and Certifications | EMC, EMI, EMS |
MTBF | 1,989,990 hrs |
PHYSICAL CHARACTERISTICS | |
Operating Temperature | 0 to 55°C (32 to 131°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Dimensions | 120.5 x 120 x 106.3 x 80 mm |