MOXA NPort Z3150 Serial to Zigbee Converter | Easy World Automation

0

MOXA NPort Z3150 Serial to Zigbee Converter

  • Serial to ZigBee / ZigBee to Ethernet Converter
  • 10/100BaseT(X) Ports (RJ45 connector)
  • 1 x RS-232/422/485 Serial port (DB9 male)
  • 12 to 48 VDC Redundant dual power inputs
  • IEEE 802.15.4/ZigBee compliant
  • DIN-rail and Wall mounting
  • IP30-rated Aluminium body design
  • 0 to 55°C operating temperature

Description

The NPort Z2150 and NPort Z3150 are IEEE 802.15.4/ZigBee compliant, providing a reliable wireless solution for serial-to-ZigBee networks requiring minimal wiring presence. The NPort Z2150 can be configured as a ZigBee coordinator (ZC), a ZigBee router (ZR), or a ZigBee end device (ZED). Any serial device can be connected to the NPort Z2150 and exchange data via PAN. A user-friendly utility is provided to configure the device type and network settings in a few simple steps.


End of Life Product - No Replacement

Please note that the NPort Z2150/Z3150 Series has been phased out. You can explore the NPort W2150A/W2250A Series in the Serial-to-Ethernet Converters.


Discover industrial automation solutions appropriate to your needs, and easily inquire about the MOXA NPort Z3150 Serial to Zigbee Converter through our user-friendly website via one of our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).

Specification

ZigBee Interface
RF Standard 802.15.4/ZigBee compliant
Frequency Band 2.4 GHz
RF Data Rate 250 kbps
Rx sensitivity -96 dBm
Tx Power 4.5 dBm (Max)
Transmission Distance Up to 100 m (open space)
Antenna External 2 dBi
RF Channel 16 channels
Device Type -
Network Topology Star, Mesh, Cluster tree
Security 128-bit AES encryption algorithms
Ethernet Interface
10/100Mbps Ports : 1 Port (Auto MDI/MDI-X connection)
Magnetic Isolation Protection 1.5 kV (built-in)
Hardware
DIP Switch Console/Operation Mode
SW1 Pull high/low resister, Termination for RS-422/485
Reset Button Reset to default
Serial Interface
Number of Ports 1 Port
Serial Standards RS-232/422/485
Connector DB9 male
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 2
Parity None, Even, Odd, Mark, Space
Flow Control None, RTS/CTS, XON/XOFF
Baudrate 50 bps to 921.6 kbps
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Data+, Data-, GND
Software
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Configuration ZigBee Configuration Utility
Firmware Upgrade ZigBee Configuration Utility
Power Requirements
Input Voltage 12 to 48 VDC (Redundant dual power inputs)
Input Current 120 mA @ 12 V
General
MTBF 1,109,589 hrs
Automatic Reboot Trigger -
Physical Characteristics
Housing Aluminum
Weight 780 g (1.72 lb)
Dimensions Without ears: 77 x 111 x 26 mm (3.33 x 4.37 x 1.02 in), With ears: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in)
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Installation DIN-rail mounting (with optional kit), Wall mounting
Standards and Certifications EMC: EN 55032/24; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 MHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF, IEC 61000-4-11 DIPs; Environmental Testing: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-3, IEC 60068-2-14; Radio Frequency: EN 301 893, EN 300 328, EN 301 489-1/17, EN 301 489-1; Safety: IEC 60950-1; Vibration: IEC 60068-2-6; IP30; Telcordia (Bellcore), GB

related products