Your Cart

Westermo LD-01BP DC Industrial Line Sharing Modem

Westermo LD-01BP DC Industrial Line Sharing Modem
Westermo LD-01BP DC Industrial Line Sharing Modem
Westermo LD-01BP DC Industrial Line Sharing Modem
Westermo LD-01BP DC Industrial Line Sharing Modem
Westermo LD-01BP DC Industrial Line Sharing Modem

  • Includes Bypass Relay for power-loss continuity
  • 1 x 10 mA tri-state balanced current loop (up to 38.4 kbit/s)
  • 1 x RS-232 Serial port (up to 38.4 kbit/s, 9 pin D-sub female)
  • Purpose-built DIN rail casing with integral clip
  • 12-36 VDC input power (with Galvanic isolation)
  • +5 to +50ºC operating temperature range

  • Operating Temperature (5 to 55°C)
  • Relative Humidity (0 to 95% RH, non-condensing)
  • IP protection (IP20)
$0.00
Ex Tax: $0.00

The LD-01 is a four-port line split modem allowing RS-232 systems to be connected in multidrop applications over long distances. The interface can be either standard RS-232 or W1, a balanced current loop allowing transmission distances up to 18 km (11.18 mi). In multidrop applications, the LD-01 acts as a repeater on the W1 interface.

DIP switches are used for configuration options which make the unit simple to install. The serial interface is connected through a standard 9 pol D-sub or terminal block with screw connectors.

The LD-01 is designed for use in heavy-duty industrial applications. The different power options, galvanic isolation, and transient protection guarantee communication in the worst environments. The LD-01 has been tested to meet many EMC, isolation, vibration, and shock standards, all to the highest levels suitable for heavy industrial environments.

The design of the line split modem makes the LD-01 suitable for a variety of applications with various speeds and data bit options. The V and Y mode emulate half or full duplex communication between master and slaves and a bypass board can be fitted to ensure networks can’t be broken by power failure at a single point.


End of Life Product - No Replacement

Please note that the LD-01 has been phased out. You can explore other types of modems in the Modems.


You can Buy the Westermo LD-01BP DC Industrial Line Sharing Modem via inquiring online at a competitive price in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman). Enjoy the cost-effective shipping options at a specific time in your location.

3g modem : Interface
SIM card slot No
Ethernet Ports No
USB No
Digital Input and Output No
Serial port Yes : 1 x RS-232 Serial port (up to 38.4 kbit/s, 9 pin D-sub female), 1x 10 mA tri-state balanced current loop (up to 38.4 kbit/s)
Alert Output No
Band Options -
Cellular Standards -
Cellular Antenna Connectors No
WLAN Standards No
WLAN Antenna Connector No
GPS Antenna Connector No
3g modem : Radio specifications
Radio Connection type -
Maximum data transfer speed of 2G -
Maximum data transfer speed of 3G -
Maximum data transfer speed of 4G -
WiFi Radio Frequency -
3g modem : Software Specifications
Routing Redundancy -
VPN -
Firewall -
Time Management -
Management -
3g modem : General
LED Indicators Channel 1: RD, TD; Channel 2-4: DCD
MTBF -
Operating mode Line Sharing Modem
3g modem : Standards and protocols
Protocols -
3g modem : Features and capabilities
Send and receive SMS No
3g modem : Security
Security and Encryption No
Authentication No
3g modem : Power Requirements
Power Connector -
Power Consumption (Output Adapter) Max 3W
Input Voltage 12-36 VDC (Operating voltage)
POE Support No
Input Current 80 mA @ 24 VDC
Reverse Polarity Protection No
3g modem : Buttons
Power button No
Reset No
3g modem : Physical Characteristics
Installation DIN-rail mounting
Dimensions 55 x 100 x 132 mm (2.16 x 3.93 x 5.19 in)
Housing -
Weight 0.3 kg
Operating Temperature +5 to +50ºC (+41 to +122°F)
Storage Humidity 5 to 95% RH, non-condensing
Storage Temperature -
Type of Use Industrial environment
Standards and Certifications Ingress protection: IP20; EMC: SS-EN 50081-1/SS-EN 55022 (1992): Class B, SS-EN 50082-2/SS-EN 61000-4-2 (1995): 4 kV CD, 8 kV AD, SS-EN 50082-2/SS-EN 61000-4-4 (1995): 4 kV power, 2 kV signals, SS-EN 50082-2/SS-EN 50140 (1993): 10 V/m, SS-EN 50082-1/SS-IEC 801-3 (1984): 3 V/m; Safety: EN 60950 (1992)

Write a review

Note: HTML is not translated!
Rating
Bad Good
Captcha