Your Cart

MOXA ioLogik E1261W-T Ethernet Remote I/O

MOXA ioLogik E1261W-T Ethernet Remote I/O
MOXA ioLogik E1261W-T Ethernet Remote I/O
MOXA ioLogik E1261W-T Ethernet Remote I/O
MOXA ioLogik E1261W-T Ethernet Remote I/O
MOXA ioLogik E1261W-T Ethernet Remote I/O
  • 5 x Analog Input Channels, 12 x Configurable DIO Channels
  • 3 x RTD Channels (Spring-type Euroblock terminal connector)
  • 1 x 10/100BaseT(X) Port (RJ45 connector)
  • 1 x RS-485 Serial port (Terminal block connector)
  • Plastic body design
  • 12 to 36 VDC input power range
  • DIN-rail and Wall mounting 
  • -40 to 75°C operating temperature range
  • Brand: MOXA
  • Model: ioLogik E1261W-T
  • Operating Temperature (-40 to 75°C)
  • Relative Humidity (5 to 95% non-condensing)
  • Shock (IEC 60068-2-27)
  • Vibration (IEC 60068-2-6)
  • Factory Automation
$0.00
Ex Tax: $0.00

Moxa’s ioLogik E1200W Series is designed for Ethernet-based remote condition monitoring systems. With 3 RTD, 5 AI, and 12 DIO channels, it features an I/O combination that is ideal for monitoring wind turbines and environmental conditions. Unlike other remote I/O products, which are passive and must poll for data, the ioLogik E1200W Series supports active communication with Moxa’s patented Active OPC Server to seamlessly connect with SCADA systems in real-time. This report-by-exception approach, which is new to PC-based monitoring requires far less bandwidth than traditional polling methods.

Push Technology for Events

When used with MX-AOPC UA Server, devices can use active push communications when communicating changes in state and/or events to a SCADA system. Unlike a polling system, when using a push architecture for communications with a SCADA system, messages will only be delivered when changes in state or configured events occur, resulting in higher accuracy and lower amounts of data that need to be transferred.


End of Life Product - Replacement Available

Please note that the ioLogik E1200W Series has been phased out and replaced by the ioThinx 4510 Series.


You can Buy the MOXA ioLogik E1261W-T Ethernet Remote I/O via inquiring online at a competitive price in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman). Enjoy the cost-effective shipping options at a specific time in your location.

Remote I/O : Interface
Digital Input and Output No
Adjustable digital input and output Yes : 12 x Channels
Analog Input and Output Yes : 5 x Analog Input Channels
Relays No
Thermal sensor input (RTD) Yes : 3 x Channels
Thermocouple input No
LAN Yes : 1 x 10/100BaseT(X) Port (RJ45 connector)
Magnetic Isolation Protection 1.5 kV (built-in)
Serial port Yes : 1 Port
Isolation Yes : 3k VDC or 2k Vrms
Buttons Reset button
Remote I/O : Serial Interface
Connector Terminal block
Serial Standards RS-485
Serial Communication Parameters Baudrate: 1200 bps to 115.2 kbps; Data Bits: 8; Flow Control: None; Stop Bits: 1
Serial Signals RS-485-2w: Data+, Data-, GND
Remote I/O : Security
Security Functions -
Remote I/O : Standards and protocols
Protocols Ethernet: Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library; Serial: Modbus RTU Server (slave)
Remote I/O : General
Compatible Softwares ioSearch utility, MXIO library, MX-AOPC UA Suite
Management BOOTP, DHCP Client, HTTP, IPv4, TCP/IP, UDP
MTBF 367,508 hrs
Remote I/O : Power Requirements
Power Connector Screw-fastened Euroblock terminal
Input Voltage 12 to 36 VDC
Power Consumption 143 mA @ 24 VDC
Remote I/O : LED Indicators
LED Indicators PWR, RDY, Serial
Remote I/O : Physical Characteristics
Housing Plastic
Dimensions 115 x 79 x 40.4 mm (4.53 x 3.11 x 1.59 in)
Standards and Certifications EMC: EN 55032/24; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF; Safety: UL 508; Shock: IEC 60068-2-27; Vibration: IEC 60068-2-6; Green Product: RoHS, CRoHS, WEEE; Telcordia SR332
Installation DIN-rail mounting, Wall mounting
Operating Temperature -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Operation Humidity 5 to 95% (non-condensing)
Weight 250 g (0.55 lb)
Altitude 2000 m

Write a review

Note: HTML is not translated!
Rating
Bad Good