Bridgewave Flex4G-1000 (ANSI) 80GHz Millimeter Wave Radio
- Spectrum efficient using 64QAM in 250, 500, and 750MHz wide channels
- Full-duplex providing up to 1Gbps upstream and downstream
- Hitless adaptive rate and modulation
- QPSK/8PSK/16/32/64QAM modulation support
- Highest system gain
- Internal carrier grade L2 switch
- SyncE and IEEE1588v2 compliant
- Power over Ethernet and Direct DC
- Extreme ranges supported with optional 30cm (43.8dBi), 60cm (51dBi), and 90cm (54dBi) external slip-fit antennas
- Small form factor and lightweight
- Quick and simple deployment
- Brand: BRIDGEWAVE
- Product Code: Flex4G-1000 (ANSI)
.png)
Description
The BridgeWave Flex4G-1000 is an ultra-low-cost 70/80GHz millimeter wave system delivering 1Gbps full-duplex data throughput per radio and the highest system gain of any 80GHz radio on the market. Available in both ANSI and ETSI versions, the Flex4G-1000 is ideal for wireless internet service providers (ISPs) and others seeking gigabit connectivity with carrier-class features and ease of installation at industry-leading price points.
Lightweight and ultra-compact to minimize installation and connectivity costs, the Flex4G-1000 features carrier-grade Ethernet switch functionality, hitless adaptive rate modulation, and ultra-low power consumption with support for both POE and direct DC power feed.
You can place an order for the Bridgewave Flex4G-1000 (ANSI) 80GHz Millimeter Wave Radio online via one of our Middle East branches (Dubai/Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| Interface | |
|---|---|
| Ethernet | 2 x 1GbE SFPs + 4 x RJ45 10/100/1000Base-T |
| Ethernet | |
| Ethernet Timing and Synchronization | SyncE (G.8261), IEEE 1588v2 (Transparent Clock) |
| Features | IPv6, IPv4 L2- 8192 MAC Address 4096 VLAN (IEEE 802.1Q) VLAN tag translation on ingress or egress Provider Bridging (IEEE 802.1ad, Q-in-Q) RSTP / MSTP |
| Classification | 8 QoS queues per port with SP or DWRR scheduling TCAM classification and remarking DSCP translation, ingress, and egress Per Queues and Per Port policing and shaping Full Duplex Flow control |
| Protection | ITU-T G.8032 Ring |
| OAM | ITU-T Y.1731 |
| General | |
| Data Throughput Rate | Up to 1000Mbps per 1+0 terminal, Up to 2000Mbps per 2+0 terminal |
| Configurations | 1+0 Non-Protected; 2+0 Dual Path Transmission utilizing Orthogonal Mode Transducer, OMT |
| Frequency Range | 71-76GHz / 81-86GHz |
| Air Interface | Full Duplex FDD |
| RF Channel Tuning | Frequency Agile in 125MHz steps |
| Channel Bandwidths | 250, 500, and 750MHz |
| Management | In-Band |
| Latency | <50µs @ 64QAM with 1024 byte packets |
| Modulation | QPSK/8PSK/32QAM/64QAM Hitless Adaptive Code and Modulation |
| Antennas | External 30cm, 43.8dBi gain, 0.9˚ beamwidth External 60cm, 51 dBi gain, 0.4˚ beamwidth External 90cm, 54 dBi gain, 0.3˚ beamwidth |
| Security | Inherently secure ultra-narrow beamwidth antennas for low probability of detection and interception Option: FIPS-197 compliant 256-bit AES Encryption (export controlled) |
| Link Budget | Up to 203dB with 90cm/36inch antenna Up to 197dB with 60cm/24inch antenna Up to 182.6dB with 30cm/12inch antenna |
| Physical Characteristics | |
| Input Power Requirements | -48VDC, PoE, 30W typical (32W Max) power consumption |
| Weight | 2.9 kg / 6.4lb |
| Temperature Range | -50°C to +60°C (-58° to +140° F) |
| IP Rating | IP67 / All Weather |
| Safety | IEC 60950-1, -22 |
| Regulatory RF Certification | US FCC Part 101, FCC Part 15B; ETSI EN 302 217-3 |
