Easy World Automation | Bridgewave Flex4G-LITE (ETSI) 80GHz Millimeter Wave Radio

Bridgewave Flex4G-LITE (ETSI) 80GHz Millimeter Wave Radio

  • Spectrum efficient using 64QAM in 250, 500, and 750MHz wide channels
  • Full-duplex providing up to 3Gbps upstream and downstream
  • Hitless adaptive rate and modulation
  • QPSK/8PSK/16/32/64QAM modulation support
  • Highest system gain
  • Internal carrier grade L2 switch
  • Built-in 2.5GbE support
  • Optional CPRI support (Modes 1 - 4)
  • SyncE and IEEE1588v2 compliant
  • Power over Ethernet
  • Compact integrated 20cm antenna available (38 dBi) for ETSI deployments Extreme ranges supported with optional 30cm (43.8dBi), 60cm (51dBi), and 90cm (54dBi) external slip-fit antennas
  • Small form factor and lightweight
  • Quick and simple deployment


The BridgeWave Flex4G-LITE delivers up to 3Gbps full-duplex data throughput per radio. Its high capacity and availability, coupled with its long-range, make it the ideal system for wireless interconnects. Lightweight and compact, the Flex4G-LITE features a single optical interface carrying 2.5 Gbps of capacity, greatly simplifying deployment and minimizing the installation and connectivity costs typically incurred with legacy systems requiring multiple fiber runs.

With carrier networking features including CPRI protocol, the FL4G-LITE all-outdoor radio is the clear choice for carriers and ISPs seeking to quickly scale deployments and increase subscriber revenue.

The BridgeWave Flex4G-LITE (ETSI) is an all-outdoor, IP radio system operating in the 71-86GHz frequency band with capacities up to 3Gbps using 64QAM modulation. Supporting both POE and direct DC feed, this compact radio system features carrier-grade Ethernet switch functionality, hitless adaptive rate modulation, and low power consumption.

To reduce deployment costs and improve field flexibility, BridgeWave Flex4G-LITE (ETSI) includes a 2.5GbE port that can also be configured for CPRI operation. BridgeWave Flex4G-LITE (ETSI) is available with an ultra-compact integrated 20cm antenna or with slip fit 30cm, 60cm, or 90cm antennas for ultra-long range. The BridgeWave Flex4G-LITE (ETSI) enables network operators to meet exponentially increasing backhaul requirements and is field-proven with thousands of links already in use worldwide.

You can place an order for the Bridgewave Flex4G-LITE (ETSI) 80GHz Millimeter Wave Radio online via one of our Middle East branches (Dubai/Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.


Ethernet 2 x SFPs for 1 x 2.5G/1G & 1 x 1G SFP + 4 x RJ45 10/100/1000Base-T
CPRI 1 x Option 1 to 4 (614.4Mbps to 3072.0Mbps)
Max Packet Size 9600 bytes (Jumbo Frame Compatible)
Ethernet Timing and Synchronization SyncE (G.8261), IEEE 1588V2 Transparent, Boundary, and Ordinary Clock support
Features IPv6, IPv4 L2- 8192 MAC Address 4096 VLAN (IEEE 802.1Q) VLAN tag translation on ingress or egress Provider Bridging (IEEE 802.1ad, Q-in-Q) RSTP / MSTP
Classification 8 QoS queues per port with SP or DWRR scheduling TCAM classification and remarking DSCP translation, ingress, and egress Per Queues and Per Port policing and shaping Full Duplex Flow control
Protection ITU-T G.8032 Ring
OAM ITU-T Y.1731
Data Throughput Rate Up to 3000Mbps per 1+0 terminal, Up to 6000Mbps per 2+0 terminal
Configurations 1+0 Non-Protected; 2+0 Dual Path Transmission utilizing Orthogonal Mode Transducer, OMT
Frequency Range 71-76GHz / 81-86GHz
Air Interface Full Duplex FDD
RF Channel Tuning Frequency Agile in 62.5MHz steps
Channel Bandwidths 250, 500, and 750MHz
Management In-Band
Latency <50µs @ 64QAM with 1024byte packets
Modulation QPSK/8PSK/32QAM/64QAM Hitless Adaptive Code and Modulation
Antennas Integrated 20 cm, 38 dBi gain, 0.8˚ beamwidth External 30 cm, 43.8dBi gain, 0.9˚ beamwidth External 60 cm, 51 dBi gain, 0.4˚ beamwidth External 90 cm, 54 dBi gain, 0.3˚ beamwidth
Physical Characteristics
Input Power Requirements -48VDC, PoE, 30W typical (32W Max) power consumption
Weight 3.2kg / 7.1lb (with integrated antenna)
Temperature Range -45°C to +60°C (-58° to +140° F)
IP Rating IP67 / All Weather
Safety IEC 60950-1, -22
Regulatory RF Certification US FCC Part 101, FCC Part 15B; ETSI EN 302 217