Easy World Automation | Bridgewave Flex4G-10000 80GHz Millimeter Wave Radio

Bridgewave Flex4G-10000 80GHz Millimeter Wave Radio

  • Up to 9.7Gbps in 1+0 and 19.3Gbps in 2+0 using respectively one or two 2000Mhz channels
  • XPIC frequency re-use technology to double capacity when spectrum is scarce and provide up to 10.5Gbps in just a single 1000Mhz channel or up to 6.0Gbps in just a single 500MHz channel
  • Adaptive Code Modulation from QPSK through 256QAM
  • 2000, 1000, 500, and 250MHz bandwidth support
  • Highest bit/Hz spectral efficiency at the longest link distances
  • LDPC FEC provides threshold improvement over other FEC technologies
  • AdaptRate™ technology, working in conjunction with ACM and QOS, automatically reduces bandwidth during extreme fade conditions to increase availability and deliver critical traffic
  • Automatic Transmit Power Control
  • Zero-footprint ODU with low power consumption and Power-over-Ethernet


The Flex4G-10000 is an E-band (70/80GHz) millimeter wave system that delivers up to 9.7Gbps capacity, 256-bit AES encryption for the highest data security, and the highest system gain in the industry to ensure maximum throughput at the longest distances. The Flex4G-10000 offers mobile network operators a much lower cost alternative to fiber in macro/cell backhaul and front haul for Centralized Radio Access (C-RAN) networks, supporting up to CPRI Mode 7 (9830.4Mbps) while offering ISPs, enterprises, and government agencies a much lower cost alternative to fiber.

The all-outdoor Flex4G-10000, which operates in the E-band range (71-86GHz) and is already shipping to customers, has been designed to alleviate the strain of backhaul connections by combining advanced radio and modem capabilities with carrier-grade 10G Ethernet, CPRI, and SONET/SDH features. The radio scales from QPSK to 256 QAM, and from 500 MHz to 2000 MHz, allowing the customer to select the optimal combination of range and throughput. The Flex4G-10000 is also easily and cost-effectively scalable to 10Gbps for BridgeWave customers who have installed Flex4G-UHA, Flex4G-3000, or Flex4G-5000 systems because it is fully compatible with the antennas deployed with those systems.

You can place an order for the Bridgewave Flex4G-10000 80GHz Millimeter Wave Radio online via one of our Middle East branches (Dubai/Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.


Ethernet 1 x 10G/2.5G/1G SFP+, 2 x 2.5G/1G SFP+, and 1 x RJ-45 for 1G
CPRI 1 x Option 1 to 7 (614.4 Mbps to 9830.4 Mbps)
SDH/SONET 1 x STM-4/OC-12 (622.08 Mbps) or 1 x STM-16/OC-48 (2488.32 Mbps)
Networking Quality of Service per IEEE 802.1p, DSCP and port based Scheduling: 8 queues allowing user configurable Strict Priority or Shaped Deficit Weighted Round Robin (SDWRR) MEF compliant traffic policing (two rate, three color scheme) VLAN per IEEE 802.1q, up to 4096 VLANs Provider Bridge Q-in-Q per IEEE 802.1ad Synchronous Ethernet (SyncE) per ITU-T G.8261, G.8262 and DNU section of G.8264 Precision Time Protocol (PTP) per IEEE1588V2 Transparent Clock One Step Congestion Management: Tail Dropping Ethernet Protection: Ring per G.8032 Maximum Ethernet frame length: Jumbo packets up to 10,000 bytes MAC Layer: Supports MAC Learning, MAC Switching, MAC Ageing Multiple Spanning Tree Protocol (MSTP), Rapid Spanning Tree Protocol: (RSTP) Link State Propagation: Rapid Link Shutdown (RSP) supports remote port LSP
Configurations 1+0, 2+0, 2+0 XPIC
Frequency Range Range: 71 – 76 GHz / 81 – 86 GHz T/R Spacing: 10 GHz, FDD operation Stability: ±10 ppm
Data Rate Up to 9.7Gbps in 1+0 and 19.3Gbps in 2+0 configuration using respectively one or two 2000Mhz channels Up to 10.5Gbps in 1000Mhz channels and 6Gbps in 500Mhz channels in 2+0 XPIC configuration
Management Web-based (HTTP/HTTPS) embedded management agent; Console Interface (CLI/SSH), IPv6 protocol stack SNMP Support: MIB-II and BridgeWave enterprise MIB, SNMP V1, V2, V3 SysLog (RFC 3164, RFC 3195) event support, RADIUS RFC2865 client support Ethernet OAM per 802.3ah (Link OAM), 802.1ag (Configuration Fault Management), Y.1731 (Performance Monitoring) Loopbacks: Ethernet (per port, per direction), Local Modem Test
Latency Dependent on configuration, as low as 12 µSec
Antennas 12” (30cm) Parabolic, 44dBi gain, 0.7° beamwidth or 24” (60cm) Parabolic, 51dBi gain, 0.4° beamwidth
Security Inherently secure ultra-narrow beamwidth antennas for low probability of detection and interception Option: FIPS-197 compliant 256-bit AES Encryption (export controlled)
F.E.C Low-Density Parity Check (LDPC)
Tx Power Output Up to 17dBm
Link Budget Up to 178dB (1ft/30cm antenna) and 192dB (2ft/60cm antenna)
Fade Mitigation Adaptive Coding and Modulation and AdaptRate™ automatic bandwidth control
Physical Characteristics
Dimensions 13.1” w x 11.6” h x 4” d (33.4 cm x 29.5 cm x 10.2 cm)
Input Power Requirements 48 VDC nominal input, ± (44 to 57) VDC input to POE or +/- (37.5 to 60) VDC direct DC input; 73W typical power consumption Max POE Cat5E/6 cable length is 328 ft (100 m) Max DC cable length with 12 AWG cables is 650 ft (198 m) and with 14 AWG cables is 400 ft (122 m)
Weight 9.6 lbs (4.4 kg)
Humidity 100% all-weather operation
Temperature Range -33°C to +55°C (-27°F to +131°F) per EN 300 019-1-4 Class 4.1
IP Rating Water Ingress: NEMA 4X (IP66)
Safety CE Mark; 60950-1; Corrosion : EN 60950-22
Regulatory RF Certification U.S. FCC Part 101, EN 302 217-3; RF Exposure: meets FCC 1.310 General Population & EN 62311 RF MPE limits
Standards/Certifications EMC/EMI: EN 301 489-1 and -4; FCC Part 15 Class B Surge & Immunity: IEC61000-4-5, GR-1089, K.21, K.44