Westermo TD-36 485 AV Industrial PSTN/Leased Line Modem | Easy World Automation

Westermo TD-36 485 AV Industrial PSTN/Leased Line Modem

  • Industrial PSTN and Leased Line Modem
  • 1 x RS-232 Port (300 bit/s – 115.2 kbit/s, 9-pin D-sub female)
  • 1 x RS-422/485 Port (300 bit/s – 115.2 kbit/s, Detachable screw terminal)  
  • 1 x PSTN / Leased Line (300 bit/s – 33.6 kbit/s, Detachable screw terminal) 
  • DIN-rail mount installation design
  • IP20-rated PC / ABS body material
  • 20 to 250 VDC / 24 to 240 VAC input power (Wide Range 18 to 300 VDC / 22 to 264 VAC)
  • -25 to +70ºC operating temperature range

Description

The TD-36 485 is an industrial modem designed to allow cost-effective and simple remote access to legacy serial industrial equipment. The AT command-driven modem is capable of synchronizing with a wide range of traditional modem negotiation standards providing data rates up to 33.6 kbit/s over both PSTN and 2- or 4-wire lease line circuits. Designed with remote unmanned industrial locations in mind the modem can operate in extremes of temperature and electromagnetic field. The complete galvanic separation of all interfaces ensures earth loops and transients do not interfere with communication. To keep visits to the site to a minimum a watchdog monitors the modem ensuring constant readiness, and remote re-configuration means that changes to settings can be handled without a site visit.

Firewalls are not an issue as data does not use the internet and with call-back security it is impossible for either accidental or deliberate access to any equipment attached to the modem. To provide resilience a second line interface allows a PSTN connection to be established in the event of a lease line failure. The modem is also simple to configure using the Westermo TD-tool software; standard commands can easily be entered and saved configurations downloaded. RS-232 connections can be made using screw connections as well as the standard D-sub. The modem is designed to be connected to devices with no ability to control dialling so special functions like data dialling and DTR dialling are provided to enable these devices to automatically establish a connection.


End of Life Product - No Replacement

Please note that the TD-36 485 has been phased out. You can explore other types of modems in the Modems.


You can explore our wide range of products and enquire about the Westermo TD-36 485 AV Industrial PSTN/Leased Line Modem for your industrial automation needs. Our sales experts will pave the way to buy at the lowest price in Dubai, UAE, Saudi Arabia, Oman, and the Middle East.

Specification

Interface
SIM card slot
Ethernet Ports
USB
Digital Input and Output : 1 x Digital I/O
Serial port : 1 x RS-232 Port (300 bit/s – 115.2 kbit/s, 9-pin D-sub female), 1 x RS-422/485 Port (300 bit/s – 115.2 kbit/s, Detachable screw terminal)
Alert Output
Band Options -
Cellular Standards -
Cellular Antenna Connectors
WLAN Standards
WLAN Antenna Connector
GPS Antenna Connector
Radio specifications
Radio Connection type -
Maximum data transfer speed of 2G -
Maximum data transfer speed of 3G -
Maximum data transfer speed of 4G -
WiFi Radio Frequency -
Software Specifications
Routing Redundancy -
VPN -
Firewall -
Time Management -
Management -
General
LED Indicators TD, RD, RTS, DCD, DTR, REL, LINE, PWR, I/O IN, I/O OUT
MTBF -
Operating mode PSTN / Leased Line Modem
Standards and protocols
Protocols TAP, UCP, B103, B212, V21, V22, V22B, V23C, V23 HDX, V32, V32B, V34, Transparent
Features and capabilities
Send and receive SMS
Security
Security and Encryption
Authentication
Power Requirements
Power Connector Detachable screw terminal
Power Consumption (Output Adapter) -
Input Voltage 20 to 250 VDC / 24 to 240 VAC (Wide Range 18 to 300 VDC / 22 to 264 VAC)
POE Support
Input Current 125 mA @ 18 VDC, 15 mA @ 110 VDC, 8 mA @ 250 VDC, 120 mA @ 22 VAC, 35 mA @ 95 VAC, 28 mA @ 240 VAC
Reverse Polarity Protection Supported
Buttons
Power button
Reset
Physical Characteristics
Installation DIN-rail mounting
Dimensions 55 x 100 x 132 mm (2.16 x 3.93 x 5.19 in)
Housing PC / ABS
Weight 0.36 kg
Operating Temperature –25 to +70°C (–13 to +158°F)
Storage Humidity 5 to 95% relative humidity
Storage Temperature –40 to +70°C (–40 to +158°F)
Type of Use Industrial environment
Standards and Certifications Ingress protection: IP20; MIL-HDBK217F; EMC: EN 55024, Immunity IT equipment EN 55022, Emission IT equipment, EN 61000-6-1, Immunity residential environments, EN 61000-6-2, Immunity industrial environments, EN 61000-6-4, Emission industrial environments, FCC part 15 Class A, EN 50121-4, Railway signalling and telecommunications apparatus, IEC 62236-4, Railway signalling and telecommunications apparatus; Safety: UL/IEC/EN 60950-1, IT equipment; PSTN: CS 03 Part 1, issue 9 FCC part 68, TIA-968-A ETSI TS103 021-1, ETSI TS103 021-2, ETSI TS103 021-3 AS/ACIF S002, AS/ACIF S006; Shock: IEC 60068-2-27; Vibration: IEC 60068-2-6