Your Cart

Westermo SDW-541-F1G-T4G Unmanaged Ethernet Switch

Westermo SDW-541-F1G-T4G Unmanaged Ethernet Switch
Westermo SDW-541-F1G-T4G Unmanaged Ethernet Switch
Westermo SDW-541-F1G-T4G Unmanaged Ethernet Switch
Westermo SDW-541-F1G-T4G Unmanaged Ethernet Switch
Westermo SDW-541-F1G-T4G Unmanaged Ethernet Switch
Westermo SDW-541-F1G-T4G Unmanaged Ethernet Switch
Westermo SDW-541-F1G-T4G Unmanaged Ethernet Switch
Westermo SDW-541-F1G-T4G Unmanaged Ethernet Switch
Westermo SDW-541-F1G-T4G Unmanaged Ethernet Switch

  • 4 x 10 Mbit/s, 100 Mbit/s or 1 Gbit/s Base TX Ports (RJ45 connector)
  • 1 x 100 Mbit/s or 1 Gbit/s Base FX SFP Ports (LC connector)
  • Redundant Dual 9.6 - 57.6 VDC power inputs
  • DIN-rail mount installation design
  • IP21-rated Plastic body material
  • -40 to +74 °C operating temperature range

  • Operating Temperature (-40 to 74°C)
  • IP protection (IP21)
  • Shock (IEC 60068-2-27)
  • Vibration (IEC 60068-2-6)
  • Relative Humidity (5 to 95% non-condensing)
  • Marine
  • Factory Automation
  • Railway Transportation
  • Road Transportation
$0.00
Ex Tax: $0.00

The SDW-541-F1G-T4G is an unmanaged 5-port switch with one SFP fibre port and four copper ports, all supporting 100 Mbit/s or Gbit Ethernet. It is designed for easy use in heavy-duty industrial, maritime, and rail trackside applications. The unit supports 802.1Q long packets, which allow all standard industrial Ethernet protocols to be used.

The Westermo range of 100 Mbit or Gbit Small Form-factor Pluggable (SFP) transceivers is available as multimode, single-mode, or Bi-Di transceivers with distances up to 120 km.

The SDW-541-F1G-T4G is designed for use in industrial applications with dual 10 to 57 VDC power input. The unique “tri-galvanic” isolation provides isolation between all ports, power supply, and between each chassis screen, avoiding ground loop currents. The IP21 rating ensures that the unit can be installed in locations where condensed water may occur. Only industrial-grade components are used, which gives the SDW-541-F1G-T4G an MTBF of 1.182.000 hours and ensures a long service life. A wide operating temperature range of –40 to +74 °C (–40 to +165 °F) can be achieved with no moving parts.

The SDW-541-F1G-T4G has been tested both by Westermo and external test houses to meet EMC, isolation, vibration, and shock standards, all to the highest levels suitable for heavy industrial, trackside, and maritime environments.

Network diagnostics are simplified with the inclusion of port mirroring on one port, allowing data flow through the switch to be monitored using a network analyzer. All five ports can have data rate and flow control locked by a DIP switch, which can eliminate problems with old legacy Ethernet equipment that is unable to support auto-negotiation.


You can also find the SDI-862-MM-SC2 and SandCat-2305-T5-LV models in the Unmanaged Ethernet Switches.


Easy World Automation offers the easiest way to buy the Westermo SDW-541-F1G-T4G Unmanaged Ethernet Switch in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman) at the lowest price through online inquiry. Our sales experts will contact you to fulfill all your industrial automation needs.

switch and hub : Interface
Number of ports 5 Ports
10/100Mb RJ45 (Megabit) Ports Yes : 4 Ports (or 10 Mb / 1 Gb)
10/100/1000Mb RJ45 (Gigabit) Ports Yes : 4 Ports (or 10 Mb / 100 Mb)
100Mb Fiber optic multi mode (Megabit) Ports No
100Mb Fiber optic single mode (Megabit) Ports No
100Mb SFP Fiber optic (Megabit) Ports Yes : 1 LC Port (or 1 Gb)
1000Mb SFP Fiber optic (Gigabit) Ports Yes : 1 LC Port (or 100 Mb)
10/100Mb (Megabit) POE Ports No
10/100/1000Mb (Gigabit) POE Ports No
Other ports No
switch and hub : Features and capabilities
Backup No
switch and hub : LED Indicators
LED Per Port Yes
switch and hub : Power Requirements
Input Current 12 - 48 VDC; 260 - 65 mA
Power Input Plugin ( Redundant ) Yes
Input Voltage -
Operating Voltage 9.6 - 57.6 VDC
Power Consumption -
switch and hub : General
Fan / Fanless Fanless
MTBF 1,182,000 hour
switch and hub : Switch specifications
Most forwarding speed -
Network working layers Layer 1
Switch type Unmanaged
Port Aggregation No
switch and hub : Physical Characteristics
Dimensions 34 x 123 x 121 mm (1.33 x 4.84 x 4.76 in)
Housing Plastic
Installation DIN-rail mounting
Operating Temperature -40 ºC to +74 ºC (-40 to +165 ºF)
Operation Humidity 5 to 95 % (non-condensing)
Standards and Certifications EMC EN 50121-4, Railway applications - Electromagnetic compatibility - Emission and immunity of the signalling and telecommunications apparatus, EN 61000-6-1, Immunity residential environments, EN 61000-6-2, Immunity industrial environments, EN 61000-6-4, Emission industrial environments; Safety: UL 60950-1, IT-equipment; Marine: DNV rules for classification - Ships and offshore units; Environmental: NEMA TS 2-2003; IP21; MIL-HDBK-217F-N2; Shock: IEC 60068-2-27; Vibration: IEC 60068-2-6
Storage Temperature -50 ºC to +85 ºC (-58 to +158 ºF)
Weight 0.2Kg
switch and hub : Standards and protocols
Protocols and work standards 802.1Q
Protocols and management standards No
switch and hub : Package Checklist
Hardware installation guide Yes
Power adapter No
Power cable No

Write a review

Note: HTML is not translated!
Rating
Bad Good