Your Cart

SIEMENS RUGGEDCOM RP110 Serial PoE Injector

SIEMENS RUGGEDCOM RP110 Serial PoE Injector
SIEMENS RUGGEDCOM RP110 Serial PoE Injector
  • Serial PoE injector
  • 802.3af/802.3at compliant version
  • RUGGEDCOM WIN compliant version
  • 1 x RS422/485 + 1 x RS232
  • IRIG-B output
  • Transmits serial data over an IP network
  • Support for Modbus TCP, DNP3, TIN serial protocols
  • Raw socket mode allows tunneling of any serial protocol
  • -40° C to +85° C operating temperature (no fans)
  • Brand: SIEMENS
  • Model: RUGGEDCOM RP110
$0.00
Ex Tax: $0.00

Consisting of the RUGGEDCOM RP100 and RP110, this family of Power-over-Ethernet injectors helps reduce costs by eliminating the need for separate power and data cabling.

RUGGEDCOM PoE injectors offer stability and performance under high levels of temperature variation, EMI stress, and voltage fluctuations that occur in electrical and industrial applications.

The RUGGEDCOM RP100 and RP110 are certified under the same tests as protection and control devices, such as a protective relay, to offer maximum performance even under harsh conditions.


You can place an order for the SIEMENS RUGGEDCOM RP110 Serial PoE Injector online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.


Products at a glance

PoE adapter : Interface
10/100Mb RJ45 (Megabit) Ports Yes : 1 port
10/100/1000Mb RJ45 (Gigabit) Ports No
Input PoE Port No
Output PoE Port Yes : RS232/422/485 port
PoE adapter : Standards and protocols
Protocols and work standards IEEE802.3af, 802.3at
PoE adapter : Power Requirements
Power Consumption 10 to 60 VDC, 88 to 300 VDC, 85 to 264 VAC
Output power -
PoE adapter : Buttons
DIP Switch -
PoE adapter : LED Indicators
PoE Yes
Power Yes
PoE adapter : Physical Characteristics
Installation DIN rail, wall mount
Dimensions 56.5 x 117.5 x 95.2 mm
Operating Temperature -40 to 85 ° C
Storage Temperature -40 to 85 ° C
Storage Humidity -
Weight 1 kg
MTBF -
Standards and Certifications EMC, safety, CSA, UL, Hazardous Locations: Class 1 Division 2, NEMA TS 2, CE, IEC 61850-3

Write a review

Note: HTML is not translated!
Rating
Bad Good
Captcha