Partners0
Products0
Industries7254
Partners0
Products0
Industries7254
When failures might cause cost extensive downtimes, you should design a redundant power supply by using several (N+1) identical power supplies.
The redundancy module SLR02 is designed to create an N+1 redundancy in combination with the PULS 24...28V power supplies units SL10, SL20 or SL30 or other 24...28V power supplies with an output current of up to 30A (max. 35A). One SLR02 is required for two power supply units.
The module decouples the power supply outputs from each other, so that in case of failure one power supply unit cannot overload the other power supply units. A relay-changeover contact, picked up under normal conditions and dropped in case of failure, indicates the status of each connected power supply unit. A Single Redundancy Module, the SLR01, is available to design a redundancy with one attached power supply unit and an output current of up to 40A (max. 50A). For smaller current values of 2.5A, 5A and 10A PULS also offers the SLR2, SLR5 and SLR10 power supplies with integrated redundancy modules.
You can place an order for the PULS SLR02 Diode redundancy module online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
| Diode redundancy module : Input Data | |
| DC-Input Voltage | DC 24V-28V (± 30%) |
| Input Current | 0*0A |
| Nominal Current Per Input | 0A |
| Diode redundancy module : Output Data | |
| Output Current Range | 0A |
| Output Current | - |
| Diode redundancy module : Physical Characteristics | |
| Dimension | 48mm x 124mm x 102mm |
| Weight | 640g |
| Mounting | Din-Rail |
| Diode redundancy module : General | |
| E Classification | eClass 5.1 27242213, eClass 6.x 27049005, eClass 7.x 27049005, eClass 8.0 27210902, eClass 9.0 27040701, ETIM 4.0 EC000599, ETIM 5.0 EC002540, HS Code HS 85044082 |
| Diode redundancy module : Package Checklist | |
| Packaging Unit | 1pc |
