Description
The GW2300 Series router has been designed for remote access applications in the harshest of environments, such as unmanned roadside cabinets, railway trackside and pole-top smart grid applications over 4G. The PoE+ capability supplies up to 60W of power across the 4 Ethernet ports to power cameras with PTZ or other PoE devices. Digital I/O options make this a very versatile device for many industrial applications.
GbE Ethernet Ports
The GW2300 Series router supports up to four 10/100/1000Mbps Ethernet interfaces. They can be configured as a single interface with Ethernet switching between them or as separate router interfaces.
PoE
The GW2300 Series supports up to four PoE ports with a total budget of 60W. The power management can allocate all the power to 2 ports for POE+ applications or spread the available power across all 4 ports depending on the power class of the connected device.
GPS Receiver
The GW2300 Series router includes a GPS receiver for positioning information, such as vehicle position in open cast mines or other application where knowing the position of the router is important. The GPS socket has a DC voltage to power an active GPS antenna.
SMS Management
The GW2300 Series router also supports SMS, so if the packet switched side of the network is down, commands can be sent to the router to perform diagnostics or even a reboot.
Ingress Protection
The GW2300 Series has been designed with rubber seals around each connector, providing an IP40 ingress protection rating.
Automatic Failover
The GW2300 can be configured to use any interface as a WAN connection. The management of the GW2304W is able to fall backwards and forwards between media interface depending on the availability.
DIN Rail Mounting
A DIN rail clip is included, which enables simple mounting for industrial applications. Optional rubber feet can be supplied for table mounting.
Centralised Management and Monitoring
The GW2300 Series router benefits from Activator, our centralised configuration management and monitoring system. Activator simplifies and automates deployment, management and support tasks in managed network environments.
You can explore our wide range of products and enquire about the Westermo GW2304-PE4-2DI2O-QFR Industrial LTE Router with PoE+ support for your industrial automation needs. Our sales experts will pave the way to buy at the lowest price in Dubai, UAE, Saudi Arabia, Oman, and the Middle East.
Specification
Interface | |
---|---|
Memory card slot for storage | |
MicroUSB | |
SIM card slot | 2 x SIM card socket with cover |
WAN | |
LAN | |
USB | |
FXO / FXS | |
DSL | |
Digital Input and Output | |
Serial port | |
Alert Output | |
Radio specifications | |
Standards and Wireless Standards | - |
2G , 3G , 4G Standards | _ |
Radio Connection type | |
WiFi Antenna | 2 or 4 cellular antenna SMA sockets, MIMO support in LTE versions, 1 x GPS SMA female antenna connector with 3.3 Volt DC power feed for active antenna |
4G / 3G / 2G Antenna | _ |
WiFi Gain Antenna | - |
4G / 3G / 2G Gain Antenna | - |
Maximum WiFi data transfer speed | - |
Maximum data transfer speed of 3G | _ |
Maximum data transfer speed of 4G | _ |
WiFi Radio Frequency | |
2G network frequency | - |
3G network frequency | - |
4G network frequency | - |
Number of radio channels | |
Maximum direct range | - |
Maximum WiFi Output Power | - |
Radio Channel Bandwidth | - |
Software Specifications | |
VPN | IPsec, IKE version 2, X.509 certificates, Elliptic Curve Cryptography (ECC), SHA2_512 support, PFS, SCEP, DH_8192 |
Firewall | |
WPS | |
Cloud computing feature | |
Serial performance | |
General | |
Operating mode | 4G LTE Router with PoE+ support |
Management | Automatic configuration using Activator server, HTTP/HTTPS browser access, Command Line Interface via SSH, SNMP agent, SMS management support enables SMS control including reboot |
Standards and protocols | |
Protocols | IEC 60870-5-104, IEC 60870-5-101, IEC 61850, Modbus RTU, Modbus TCP, Modbus RTU to TCP automatic conversion, DNP3 |
Serial port standard | |
Features and capabilities | |
3G phone calls | - |
Create and edit phonebook | - |
Send and receive SMS | - |
Security | |
Security and Encryption | - |
Authentication | - |
Serial security | |
SSID | - |
Power Requirements | |
Power Consumption (Output Adapter) | |
POE Support | |
Battery | |
Type of power input | - |
Buttons | |
Power button | |
3G / WAN button | |
WPS button | |
Reset | |
LED Indicators | |
Phone | |
SMS | |
WLAN | |
3G / 2G | - |
WAN | |
LAN | - |
Power | : 20-60V DC isolated input (default), PoE support with input voltage over 44V, PoE+ support with input voltage over 50V |
Internet | - |
Wireless Signal Strength | |
WPS | |
Physical Characteristics | |
Dimensions | |
Weight | - |
Operating Temperature | -40°C to +70 °C |
Storage Humidity | - |
Storage Temperature | - |
Type of Use | Industrial environment |
Standards and Certifications | CE RED, EN 60950 safety approval, EN 55022 and EN 55024 EMC, EN 300 328 V1.9.1, Freefall drop test to EN60068-2-32:2008, Bump test to EN60068-2-27:2009, Random vibration test to EN60068-2-64:2008, Mechanical shock test to EN60068-2-27:2009 |
Optical isolation |