Contact Form
- 1 x 10/100/1000BaseT(X) Ports (RJ45 connector)
- 1 x 1000BaseLX Ports (single-mode SC connector)
- 12 to 48 VDC input power range
- Metal body design
- DIN-rail mounting
- -40 to 75°C operating temperature
- Brand: MOXA
- Model: IMC-21GA-LX-SC-T
-
Operating Temperature (-40 to 75°C)
-
Relative Humidity (5 to 95% non-condensing)
-
Vibration (IEC 60068-2-6)
The IMC-21GA industrial Gigabit media converters are
designed to provide reliable and stable
10/100/1000BaseT(X)-to-100/1000Base-SX/LX or selected 100/1000Base SFP module
media conversion. The IMC-21GA supports IEEE 802.3az (Energy-Efficient
Ethernet) and 10K jumbo frames, allowing it to save power and enhance
transmission performance. All IMC-21GA models are subjected to a 100% burn-in
test, and they support a standard operating temperature range of 0 to 60°C and
an extended operating temperature range of -40 to 75°C.
You can also find the IMC-21GA-SX-SC, IMC-21GA, and IMC-21GA-LX-SC models in the Industrial Media Converters.
Easy World Automation offers the easiest way to buy the MOXA IMC-21GA-LX-SC-T Ethernet to Fiber Converter in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman) at the
lowest price through online inquiring. Our sales experts will contact you to
fulfill all your industrial automation needs.
| eth to fiber : Interface | |
| 10/100Mb RJ45 (Megabit) Ports | No |
| 10/100/1000Mb RJ45 (Gigabit) Ports | Yes : 1 Port |
| 10/100Mb (Megabit) POE Ports | No |
| 100Mb Fiber optic multi mode (Megabit) Ports | No |
| 1000Mb Fiber optic multi mode (Gigabit) Ports | No |
| 100Mb Fiber optic single mode (Megabit) Ports | No |
| 1000Mb Fiber optic single mode (Gigabit) Ports | Yes : 1 SC Port |
| 1000Mb SFP Fiber optic (Gigabit) Ports | No |
| M12 port | No |
| Alert Output | No |
| Magnetic Isolation Protection | 1.5 kV (built-in) |
| eth to fiber : Standards and protocols | |
| Protocols and work standards | IEEE 802.3az |
| eth to fiber : General | |
| Maximum cable length for data transfer | 10 KM |
| MTBF | 2,762,058 hrs |
| eth to fiber : Power Requirements | |
| Input Voltage | 12 to 48 VDC |
| Input Current | 284.7 mA @ 12 to 48 VDC |
| Overload Current Protection | Supported |
| Type of power input | Terminal block |
| Power Consumption | 284.7 mA @ 12 to 48 VDC |
| eth to fiber : Physical Characteristics | |
| Standards and Certifications | EMC: EN 55032/24; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m, IEC 61000-4-8 PFMF, IEC 61000-4-11; Environmental Testing: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-3; Safety: EN 60950-1, UL 60950-1; Vibration: IEC 60068-2-6; MIL-HDBK-217F |
| Housing | Metal |
| Dimensions | 30 x 125 x 79 mm (1.19 x 4.92 x 3.11 in) |
| Weight | 170 g (0.37 lb) |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 75°C (-40 to 167°F) |
| Operation Humidity | 5 to 95% (non-condensing) |
| Installation | DIN-rail mounting |