Your Cart

MOXA ICF-1180I-S-ST-T PROFIBUS to Fiber Converter

MOXA ICF-1180I-S-ST-T PROFIBUS to Fiber Converter
MOXA ICF-1180I-S-ST-T PROFIBUS to Fiber Converter
MOXA ICF-1180I-S-ST-T PROFIBUS to Fiber Converter
MOXA ICF-1180I-S-ST-T PROFIBUS to Fiber Converter
MOXA ICF-1180I-S-ST-T PROFIBUS to Fiber Converter
MOXA ICF-1180I-S-ST-T PROFIBUS to Fiber Converter
MOXA ICF-1180I-S-ST-T PROFIBUS to Fiber Converter

  • PROFIBUS to multi-mode ST fiber-optic converter
  • 1 x PROFIBUS Port (DB9 female connector)
  • 1 x 100BaseFX port (single-mode ST connector)
  • 45 KM Typical data transmission distance on fiber
  • 12 to 48 VDC Redundant dual power inputs
  • IP30-rated Metal body design
  • DIN-rail and Wall mounting
  • -40 to 75°C operating temperature

  • Brand: MOXA
  • Model: ICF-1180I-S-ST-T
  • Operating Temperature (-40 to 75°C)
  • Relative Humidity (5 to 95% non-condensing)
  • IP protection (IP30)
  • Vibration (IEC 60068-2-6)
  • Hazardous Location (Class 1 Division 2, ATEX, IECEx)
  • Oil & Gas
  • Marine
$0.00
Ex Tax: $0.00

The ICF-1180I industrial PROFIBUS-to-fiber converters are used to convert PROFIBUS signals from copper to optical fiber. The converters are used to extend serial transmission up to 4 km (multi-mode fiber) or up to 45 km (single-mode fiber). The ICF-1180I provides 2 kV isolation protection for the PROFIBUS system and dual power inputs to ensure that your PROFIBUS device will perform uninterrupted.


You can also find the ICF-1180I-S-ST, ICF-1180I-M-ST-T, and ICF-1180I-M-ST models in the Protocol Converters.


Explore our extensive range of industrial automation products such as MOXA ICF-1180I-S-ST-T PROFIBUS to Fiber Converter in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).  Submit your inquiry to enjoy the on-time delivery service. Our sales experts will contact you to fulfill all your industrial automation needs.

converter : Interface
100Mb Fiber optic single mode (Megabit) Ports Yes : 1 ST Port
100Mb Fiber optic multi mode (Megabit) Ports No
Serial port No
Other ports Yes : 1 x PROFIBUS Port (DB9 female connector)
Isolation Yes : 2 KV
converter : Converter specifications
Data transfer speed ( Baudrate ) 9600 bps to 12 Mbps
Maximum data transmission distance 45 Km on fiber
Minimum output power converter -7 dBm
Sensitivity to receiving information -29 dBm
Require cable diameter -
Flow Control -
Protocols PROFIBUS DP
converter : Serial Signals
RS-232 Signals -
RS-422 Signals -
RS-485-2w Signals -
RS-485-4w Signals -
converter : Power Requirements
Power Consumption (Output Adapter) 269 mA @ 12 to 48 VDC
Power Input Plugin ( Redundant ) Yes
Overload Current Protection Supported
Reverse Polarity Protection Supported
Input Voltage 12 to 48 VDC
Input Current 269 mA @ 12 to 48 VDC
Connector Terminal block
converter : General
Fan / Fanless -
MTBF 1,722,769 hrs
converter : Physical Characteristics
Dimensions 30.3 x 115 x 70 mm (1.19 x 4.53 x 2.76 in)
Housing Metal
Installation DIN-rail mounting (with optional kit), Wall mounting
Operating Temperature -40 to 75°C (-40 to 167°F)
Operation Humidity 5 to 95% (non-condensing)
Standards and Certifications EMC: EN 55032/35;EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 0.5 kV, IEC 61000-4-5 Surge: Power: 0.5 kV, IEC 61000-4-6 CS: 3 V, IEC 61000-4-8 PFMF; Environmental Testing: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-3; Hazardous Locations: ATEX, Class I Division 2, IECEx; Maritime: DNV; Safety: IEC 60950-1, UL 508; Vibration: IEC 60068-2-6; IP30; Telcordia (Bellcore), GB
Storage Temperature -
Weight 180 g (0.39 lb)
converter : LED Indicators
LED Per Port Yes
Power Yes

Write a review

Note: HTML is not translated!
Rating
Bad Good