Your Cart

Beijer ST-1114 Digital input module

The FnIO S series is a micro modular remote IO-system from Crevis, which contains a wide selection of digital and analog modules as well as special modules. Together with a selected bus/ node module, the system is easily combined to make standalone IO-nodes.

The IO-system, which has an IP20 enclosure, is installed on a standard 35 mm DIN rail. Stable communication between the modules in the node is guaranteed via a unique sliding contact system.

A standard IO module is only 12 mm in width, and when using 16 channel IO modules a complete node is made up of 64 IOs of only 90 mm in width.

The FnIO S series supports known bus systems such as Profibus DP/V1, CC-Link, CANopen, Modbus-TCP, Modbus-RS232, and Modbus-RS485.


Experience the convenient way to purchase the Beijer ST-1114 Digital input module in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman). Our sales experts will provide the most helpful information about the price and sale conditions for a wonderful buying experience.

Beijer module : Power Requirements
Current consumption 35 mA @ 5.0V DC
Beijer module : Input specification
Input type Sink Type (Positive Logic)
Number of inputs 4
ON -state voltage 12/24 V DC (10.2-28.8V)
OFF-state voltage Max. 0.8V DC
ON-state current Max. 4.5 mA @5.5VDC
Nominal input impedance Typical 1.3 kΩ
Input delay OFF to ON: Max. 0.5ms / ON to OFF: Max. 0.5ms
Filtering time Typical 1.5ms (software filtering)
Beijer module : Output specification
I/O connector Removable terminal block, cage clamp
Beijer module : Physical Characteristics
Mechanical size 12 mm x 99 mm x 70 mm
Module weight 70 g
System indicators 4 green input state, 1 green/red Bus state

Write a review

Note: HTML is not translated!
Rating
Bad Good