The FnIO S series is a micro modular remote IO-system from Crevis, which contains a wide selection of digital and analog modules as well as special modules. Together with a selected bus/ node module, the system is easily combined to make standalone IO-nodes.
The IO-system, which has an IP20 enclosure, is installed on a standard 35 mm DIN rail. Stable communication between the modules in the node is guaranteed via a unique sliding contact system.
A standard IO module is only 12 mm in width, and when using 16 channel IO modules a complete node is made up of 64 IOs of only 90 mm in width.
The FnIO S series supports known bus systems such as Profibus DP/V1, CC-Link, CANopen, Modbus-TCP, Modbus-RS232, and Modbus-RS485.
You can place an order for the Beijer ST-1314 Digital input module online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
|Current consumption||35 mA @ 5.0V DC|
|Input type||Sink Type (Positive Logic)|
|Number of inputs||4|
|ON -state voltage||48 V DC (34-60V)|
|OFF-state voltage||Max. 10V DC|
|ON-state current||Max. 4 mA @48VDC|
|Nominal input impedance||Typical 12 kΩ|
|Input delay||OFF to ON: Max. 3ms / ON to OFF: Max. 3ms|
|I/O connector||Removable terminal block, cage clamp|
|Mechanical size||12 mm x 99 mm x 70 mm|
|Module weight||70 g|
|Mounting||35mm DIN rail|
|System indicators||4 green input state, 1 green/red Bus state|
|Operating temperature||-20° to + 55°C|
|Storage temperature||-40° to + 85°C|