PULS YRM2.DIODE Diode redundancy module
- Redundancy module for building redundant systems
- Two 10A inputs, one 20A output
- Two-alarm relay-contacts for -h input voltage
- Only 0.85V voltage drop between input and output under full load
- Full output current between -40 and +60°C
- Reverse polarity protected the input
Description
The YRM2.DIODE is a redundancy module, which can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can be connected to power supplies with up to 10A output current and one output, which can carry nominal currents up to 20A. The module is suitable for power supplies with constant current overload behavior as well as any kind of “Hiccup” overload behavior.
The YRM2.DIODE has a monitoring circuit included and is the perfect solution when the power supply has no DC-OK function. Two LEDs and two relay contacts signal when one of the two DC-input voltages is not in range due to a non-functioning or disconnected power supply. In addition to the YRM2.DIODE is the YR2.DIODE which has no monitoring circuitry included. This is the perfect fit when the power supply itself is already equipped with a DC-OK signal (e.g.: DIMENSION Q-Series).
Large screw terminals allow an easy installation and a huge international approval package for a variety of applications makes this unit suitable for nearly every situation.
You can place an order for the PULS YRM2.DIODE Diode redundancy module online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| Input Data | |
|---|---|
| DC-Input Voltage | DC 12V-28V |
| Input Current | 2*40A |
| Nominal Current Per Input | 40A |
| Voltage Drop | 65mV |
| Output Data | |
| Output Current Range | 80A |
| Output Current | 80A |
| Output Current Short circuit max. | 44.00A |
| Physical Characteristics | |
| Dimension | 46mm x 124mm x 127mm |
| Weight | 370g |
| Mounting | Din-Rail |
| Operating Temperature | -40°C ... +70°C |
| General | |
| Derating | 2W/° at >+60°C |
| Power Losses, typ. | 2.9W |
| MTBF | 2.500.000h |
| Connection method | screw terminals |
| E Classification | eClass 5.1 27242213, eClass 6.x 27049005, eClass 7.x 27049005, eClass 8.0 27210902, eClass 9.0 27040701, ETIM 4.0 EC000599, ETIM 5.0 EC002540, HS Code HS 85044082 |
| Power Losses no Load | 0.2W |
| Package Checklist | |
| Packaging Unit | 1pc |
