Easy World Automation | PULS PIRD20.241 Diode redundancy module

PULS PIRD20.241 Diode redundancy module

  • Cost Effective Solution to Build Redundant Systems
  • Dual Input and Output
  • Two Diodes (Common Cathode)
  • DC 12-28V ±25% Wide-range Input
  • Full Power Between -40°C and +55°C
  • Width only 39mm
  • Large Screw Terminals

Description

The PIRD20.241 is a redundancy module, which can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can be connected to power supplies with up to 10A output current and one output, which can carry nominal currents up to 20A. The module is suitable for power supplies with constant current overload behavior as well as any kind of “hiccup” overload behavior.

The PIRD20.241 is the perfect solution to use in a redundant system, if the power supply itself is equipped with a DC-OK signal. Another application for this redundancy module is to separate sensitive loads from non-sensitive loads. This avoids the distortion of the power quality for the sensitive loads which can cause controller failures.



You can place an order for the PULS PIRD20.241 Diode redundancy module online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

Input Data
DC-Input Voltage DC 12V-28V (± 25%)
Input Current 2*10A
Nominal Current Per Input 10A
Voltage Drop 460mV
Output Data
Output Current Range 0-20A
Output Current 20A
Output Current Short circuit max. 26.0A
Physical Characteristics
Dimension 39mm x 124mm x 124mm
Weight 280g
Mounting Din-Rail
Operating Temperature -40°C ... +70°C
General
Derating 0.5W/° at >+55°C
Power Losses, typ. 4.6W
MTBF 20310000h
Connection method screw terminals
E Classification eClass 5.1 27242213, eClass 6.x 27049005, eClass 7.x 27049005, eClass 8.0 27210902, eClass 9.0 27040701, ETIM 4.0 EC000599, ETIM 5.0 EC002540, HS Code HS 85044082
Power Losses no Load 0W
Package Checklist
Packaging Unit 1pc