MOXA AIG-101-T-US Modbus Gateway
- LTE Cat.1 US
- Supports generic MQTT client
- Supports MQTT connection with built-in device SDKs for Azure/AWS cloud
- Supports Modbus RTU/ASCII/TCP master/client
- Supports Modbus TCP server
- -40 to 70°C operating temperature range
- Supports data buffering using store and forward and datalogger
The AIG-100 Series gateways are entry-level IIoT gateways that connect Modbus RTU/ASCII/TCP devices to cloud platforms and applications such as Azure, AWS, and MQTT. The AIG-100 as a Modbus master can integrate existing Modbus devices with cloud platforms, effortlessly collecting and transmitting data to the Azure and AWS clouds. Moreover, the gateways also support the Modbus TCP slave mode, enabling simultaneous transmission of data to a cloud platform and local SCADA system.
Effortless Extension of I/O and Serial Interfaces
As the number of field sites increases, additional I/O or serial interfaces are required to connect devices, such as sensors, meters, and inverters, for collecting and processing the large amount of data that is generated. A typical approach is to install remote I/O and device servers to extend the interfaces, but the configuration settings required can be a nightmare for most users. To provide an extremely simple configuration process for interface extension, AIG-100 gateways have better integration and come with an intuitive wizard that can configure Moxa ioLogiks and UPorts with just a few clicks.
Built-in Ready-to-use Data Preprocessing Functions, No Coding Required
Energy Management Systems mainly collect energy data such as average power generation and energy efficiency. This data is then used to display on-site conditions, observe the energy trend, and optimize energy usage. Most edge systems require additional programming to process the data required by the energy management system. The AIG-100 can preprocess the edge data and directly send meaningful data to the energy management systems. The intuitive UI enables easy configuration of the IIoT gateway settings to collect and process data.
Secure Remote Access Reduces Maintenance Costs
The AIG-100 comes with powerful troubleshooting tools to diagnose issues with protocol statuses and capture and analyze traffic packets, enabling engineers to remotely identify the root cause of issues and quickly bring the operation back to normal. The tools also provide secure remote access to the AIG-100 to enable the maintenance engineers to directly access it, saving a lot of time and effort and reducing system downtime in energy management systems.
You can place an order for the MOXA AIG-101-T-AP Modbus Gateway online via one of our Middle East branches (Dubai/Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
|10/100Mb RJ45 (Megabit) Ports||: 2 Ports (Auto MDI/MDI-X connection)|
|RS-232/422/485 Ports||: 1 Port|
|Serial port specifications|
|Serial Communication Parameters||Data Bits: 7, 8; Stop Bits: 1, 2; Parity: None, Even, Odd, Space, Mark|
|Data transfer speed ( Baudrate )||300 bps to 921.6 kbps|
|RS-485 Flow Control||-|
|Protection against electrostatic discharge||-|
|Standards and protocols|
|Ethernet Protocol||Modbus TCP|
|Serial Protocol||Modbus RTU/ASCII Master|
|Serial Communication Parameters|
|Management||Web Console (HTTP/HTTPS), Time Management: NTP Client; GPS|
|Compatible operating systems||-|
|Power Consumption (Output Adapter)||-|
|Type of power input||Screw-fastened Euroblock terminal|
|Dimensions||128.5 x 89.1 x 41 mm (5.06 x 3.51 x 1.61 in)|
|Standards and Certifications||EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV Signal: 1 kV, IEC 61000-4-5 Surge: Power: 1 kV Signal: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF; Safety: IEC 62368-1, UL 62368-1, EN 62368-1; Shock: IEC 60068-2-27; Vibration: IEC 60068-2-64, 5 Grms @ 5 to 500 Hz, random wave, 1 hr per axis (without USB devices attached); Radio Frequency; Carrier Approvals; Green Product|
|Operating Temperature||-40 to 70°C (-40 to 158°F)|
|Storage Temperature||-40 to 85°C (-40 to 185°F)|
|Operation Humidity||5 to 95% (non-condensing)|