Description
SLZ10-14 adapters allow mounting PULS switched mode power supplies or other DIN rail units on the S7-300 rail, which differs from other rails. Thus, a separate DIN rail is not necessary anymore. The adapter consists of a mounting bracket which is put onto the S7-300 rail and fixed at the lower edge with two screws which are included. The DIN rail power supply or any other device can then be mounted on a DIN rail piece of sufficient length fixed on this mounting bracket. The adapters are available in various widths for different unit sizes (see table below).
You can place an order for the PULS SLZ14 Adapter online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
Physical Characteristics | |
---|---|
Dimension | 121mm x 125mm x 18mm |
Weight | 240g |
Mounting | S7-300 Rail |
Material | Metal |
General | |
E Classification | eClass 5.1 27049090, eClass 6.x 27049090, eClass 7.x 27049090, eClass 8.0 27049090, eClass 9.0 27049090, ETIM 4.0 EC002625, ETIM 5.0 EC001024, HS Code HS 85049099 |
Package Checklist | |
Packaging Unit | 1pc |