Westermo CyBox LTE 2-W LTE and WLAN Router | Easy World Automation

Westermo CyBox LTE 2-W LTE and WLAN Router

  • Optional Wi-Fi 5 radio with 3 x 3 MIMO with up to 1300 Mbps
  • Up to 2 x LTE interfaces for channel-bundled WAN access
  • 4 x SIM card slots for each LTE interface
  • 2 x 10/100/1000BaseT(X) Ports (M12 X-coded connector)
  • 1 x USB/Serial Port (USB 2.0, RS232, M12 A-coded connector)
  • Power over Ethernet (PoE+) according to IEEE 802.3at
  • IP40-rated aluminum body and wall mounting
  • Ultra-wide-range power supply 24 to 110 VDC
  •  -40 °C to +70 °C operating temperature range

Description

The CyBox LTE 2-W is a member of the CyBox family – robust wireless communication routers for railway applications. It offers stable, secure, and broadband LTE connections for train-to-ground communication and high-speed internet. The device hosts up to two LTE interfaces for parallel LTE channel use and thus maximizes throughput, or one Wi-Fi 5 interface combined with an LTE interface to boost network efficiency and connect to client devices such as mobile phones. Country-specific LTE/Wi-Fi standards are adopted for worldwide use in every type of train.

On the fixed network side, the router features two Gigabit Ethernet ports, which are, as an option, internally connected to an unmanaged switch and can be used either for redundancy to increase the availability of services or to connect a second CyBox LTE 2-W. The bypass relay option ensures a high-speed connection even if the router is powered down.

The CyBox LTE 2-W provides flexible powering options by either an internal power supply or Power-over-Ethernet (PoE+). The PoE daisy chaining offers wireless connectivity with two routers using just one cable – a noticeable cost-saving factor, especially in retrofit programs.

The CyBox LTE 2-W firmware provides a convenient management interface via a web service. Besides global setup parameters, the open-source software OpenWrt allows the configuration of the radio interfaces, including provider information and the login dialog, as well as the setup of the stateful firewall. The access point, router configurations, and management firmware can be updated remotely. Furthermore, the built-in, fully configurable stateful firewall and multi-VPN support with hardware-accelerated encryption ensure communication security.


You can also find the CyBox GW 2-PCyBox GW-PCyBox RT 2-A, and CyBox RT 3-W models in the Wireless Routers.


You can explore our wide range of products and enquire about the Westermo CyBox LTE 2-W LTE and WLAN Router for your industrial automation needs. Our sales experts will pave the way to buy at the lowest price in Dubai, UAE, Saudi Arabia, Oman, and the Middle East.

Specification

Interface
SIM card slot : Up to 4 SIM cards per LTE interface
Ethernet Ports : 2 x 10/100/1000BaseT(X), M12 X-coded connectors
USB : 1 x USB 2.0 Port (M12 8-pin female A-coded connector)
Digital Input and Output
Serial port : 1 x RS232 Port (M12 8-pin female A-coded connector)
Alert Output
Band Options 4G (LTE) Bands: B1, B3, B7, B8, B20, B28, B32, B38, B40, B41, B42, B43; 3G Bands: B1, B5, B8
Cellular Standards 4G (LTE Cat-7), 3G
Cellular Antenna Connectors 5 or 6 x QLS or 3 x SMA antenna connectors with optional QLS to SMA adapter
WLAN Standards IEEE 802.11 a/b/g/n/ac (Wi-Fi 5)
WLAN Antenna Connector 3 x RF antennas (3 x 3 MIMO technology)
GPS Antenna Connector
Radio specifications
Radio Connection type Supports up to 2 LTE interfaces for channel-bundled WAN access
Maximum data transfer speed of 2G -
Maximum data transfer speed of 3G -
Maximum data transfer speed of 4G up to 300 Mbps download / 150 Mbps upload
WiFi Radio Frequency 2.412 GHz to 2.472 GHz, or 4.920 GHz to 5.825 GHz, selectable band
Software Specifications
Routing Redundancy Optional internal high-speed Ethernet switch for redundancy or daisy chaining
VPN multi-VPN with hardware-accelerated encryption
Firewall Stateful firewall with multi-level client/AP isolation
Time Management
Management
General
LED Indicators Power LED Status, Fail LED Status, Module 1 LED Status, Module 2 LED Status, LAN LED Status
MTBF approx. ~280.000 h (acc. to IEC 62380)
Operating mode Access Point, Router
Standards and protocols
Protocols NMEA, RTCM 104 (GNSS)
Features and capabilities
Send and receive SMS
Security
Security and Encryption Encryption: AES, TKIP, WPA, WPA2, WPA3
Authentication
Power Requirements
Power Connector M12 4-pin male A-coded
Power Consumption (Output Adapter) 15 W typ., 25 W max.
Input Voltage 24 to 110 VDC, wide-range power supply (compliant to EN 50155)
POE Support : PoE+, Class-4 powered device, IEEE 802.3at
Input Current -
Reverse Polarity Protection -
Buttons
Power button
Reset
Physical Characteristics
Installation Wall Mounting
Dimensions 105 (130) mm x 55 mm x 206 mm (w h d) (incl. mounting points)
Housing IP40, aluminum, conductive cooling
Weight up to 1350 g
Operating Temperature depending on temperature class of Wi-Fi module, Class OT4, -40.. +70 °C (85 °C) operating or, Class OT3, -25.. +70 °C (85 °C) operating
Storage Humidity max. 95 % non-condensing operating and storage
Storage Temperature -40 °C to +85 °C
Type of Use Railway applications
Standards and Certifications Directive (EU) 2016/797: EN 50155 (IEC 60571), EN 45545-2 (HL 1 to HL 3), EN 61373 (Category 1, Class B); RED – 2014/53/EU: EMC, radio spectrum, health & safety; IP40; IEC 62380