Easy World Automation | Westermo CyBox RT 3-W Wi-Fi 5 Wave 2 Router

Westermo CyBox RT 3-W Wi-Fi 5 Wave 2 Router

  • EN 50155 5G and Wi-Fi 5 Router
  • 4 x 4 MIMO
  • 9 x QLS antenna connectors
  • 2 x 1 Gbps ports, M12 connectors
  • 4 x SIM card slots
  • 1 x GNSS
  • Power feed 24 to 110 VDC

Description

The CyBox RT 3-W provides flexible powering options by either an internal power supply or Power-over-Ethernet (PoE+). The PoE daisy chaining offers wireless connectivity with two routers using just one cable – a noticeable cost-saving factor especially in retrofit programs.  The CyBox RT 3-W firmware provides a convenient management interface via a web service. Besides global setup parameters the open source software OpenWrt allows the configuration of the radio interfaces, including provider information and the login dialog, as well as the setup of the stateful firewall. The access point and router configurations as well as the management firmware can be updated remotely. Furthermore,the built-in fully configurable stateful firewall and multiVPN support with hardware-accelerated encryption ensures communication security.


You can place an order for the Westermo CyBox RT 3-W Wi-Fi 5 Wave 2 Router, which is applicable in the Railway Transportation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

5G INTERFACE
3G Bands B1, B2, B3, B4, B5, B8
4G (LTE) Bands B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B34, B38, B39, B40, B41, B42, B43, B48, B66, B71
Antenna 4x RF antennas, with Diversity and Massive-MIMO
Transfer Rates up to 2.4 Gbps download / 500 Mbps upload
INTERFACE
LAN 1 GBaseT M12 X-coded or 10 GBaseT SFP optical
Power Input M12 4-pin male A-coded
Reset Switch available on front panel
Software Linux OS OpenWrt
System Architecture Dual-Core CPU T1023, 1200 MHz 1 GB RAM, 128 MB Flash
USB/Serial Port M12 8-pin female A-coded, USB 2.0, RS232
Antenna connectors QLS connectors
GENERAL
MTBF approx. ~260.000 h
WI-FI INTERFACE
Encryption AES, TKIP, WPA, WPA2, WPA3
Frequency Range 2.412 GHz to 2.484 GHz, or 5.180 GHz to 5.825 GHz, selectable band
Operational Feature up to 256 clients per radio
Security stateful firewall with multi-level client isolation
Transfer Rates up to 1733 Mbps
GNSS INTERFACE
Accuracy up to 1.5 m
Frequency Band GPS (L1), GLONASS (L1, FDMA), Galileo (E1) ready, Beidou, QZSS constellations
Protocol Standards NMEA, RTCM 104
Time To First Fix cold start < 35 s, warm start 1 s
POWER REQUIREMENTS
Interruptions of Voltage Supply EN 50155, Class S2
Power Supply 24 to 110 VDC, wide-range power supply (compliant to EN 50155)
Power consumption 20 W typ., 25 W max
PHYSICAL CHARACTERISTICS
Ambient Temperature depending on temperature class of Wi-Fi module Class OT4, -40.. +70 °C (85 °C) operating or Class OT3, -25.. +70 °C (85 °C) operating -40.. +85 °C storage
Humidity max. 95 % non-condensing operating and storage
Housing IP40, aluminum, wall-mount, conductive cooling
Dimensions 105 (130) mm x 70 mm x 204 mm (w h d) (incl. mounting points)
Weight up to 1850 g
Standards and Certifications EN 50155 (IEC 60571) EN 45545-2 (HL 1 to HL 3) EN 61373 (Category 1, Class B)