MOXA AWK-5222-US Wireless AP/Bridge/Client
- Supports US Frequency Bands
- 2 x 10/100BaseT(X) port (RJ45 connector)
- IEEE 802.11a/b/g compliant
- 12 to 48 VDC Redundant dual power inputs
- IP30 Metal body design
- DIN-rail and Wall mounting
- -25 to 60°C operating temperature
.png)
Description
Moxa’s wireless redundancy technology allows you to set up independent wireless connections to avoid interruptions in transmission, even if interference occurs on one of the supported frequencies. The AWK-5222 is equipped with the newest proprietary wireless redundancy technology, which has two independent RF modules and supports a greater variety of wireless configurations and applications. The redundant wireless connections increase the reliability of the entire wireless network. The AWK-5222 is compliant with industrial standards and approvals, covering operating temperature, power input voltage, surge, ESD, and vibration. The AWK5222 is rugged enough to help you establish the most robust wireless connection for critical industrial wireless applications.
End of Life Product - No Replacement
Please note that the AWK-5222 Series has been phased out. You can explore the AWK-3131A-RCC Series and AWK-3251A-RCC Series in the Rail Wireless LAN.
You
can explore our wide range of products and enquire about the MOXA AWK-5222-US Wireless Access Point for your
industrial automation needs. Our sales experts will pave the way to buy at the
lowest price in Dubai, UAE, Saudi Arabia, Oman, and the Middle East.
Specification
| Interfaces | |
|---|---|
| 10/100/1000BaseT(X) Ports | |
| Modulation Type | DSSS with DBPSK, DQPSK, CCK; OFDM with BPSK, QPSK, 16QAM, 64QAM, 64QAM @ 54 Mbps, 16QAM @ 24/36 Mbps, QPSK @ 12/18 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBSK@ 1 Mbps; 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 11 Mbps; 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps |
| Frequency Band | 2.412 to 2.462 GHz (11 channels), 5.18 to 5.24 GHz (4 channels) |
| PoE Ports | |
| 100BaseFX Ports | |
| Wireless Security | - |
| WLAN Antenna Connector | 2 x RP-SMA (female) |
| Security | SSID broadcast enable/disable, Firewall for MAC/IP/Protocol/Port-based filtering, 64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES) |
| WLAN Operation Mode | Access Point, Bridge, Client |
| WLAN Standards | IEEE 802.11a/b/g for Wireless LAN, IEEE 802.11i for Wireless Security, IEEE 802.3 for 10BaseT(X), IEEE 802.3u for 100BaseT(X), IEEE 802.3af for Power-over-Ethernet, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN |
| 1000BaseSFP Slots | |
| Transmission Rates | 802.11b: 1, 2, 5.5, 11 Mbps, 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 10/100BaseT(X) Ports | : 1 Port (auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection) |
| Digital Inputs | : 2 electrically isolated inputs, +13 to +30 V for state “1”, +3 to -30 V for state “0”, Max. input current: 8 mA |
| Console Port | : RS-232 (RJ45-type connector) |
| Serial Ports | |
| M12 Connector | |
| Power Requirement | |
| Input Current | - |
| Connector | 10-pin removable terminal block |
| Input Voltage | 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant) |
| Power Consumption | 12 to 48 VDC, 800 mA (max.) |
| Reverse Polarity Protection | Supported |
| Physical Characteristics | |
| Humidity | 5% to 95% (non-condensing) |
| Dimensions Packaged | 62 x 135 x 105 mm (2.44 x 5.31 x 4.13 in) |
| Weight (PACKAGED) | 1.1 kg |
| Housing | Metal |
| Installation | DIN-Rail mounting (standard), Wall mounting (optional) |
| Standards and Certifications | Safety: UL 60950-1, EN 60950-1; EMC: EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024, IEC 61000-6-2/4; Radio: EN 300 328, EN 301 893, FCC ID SLE-WAPA003; IP30 |
| Operating Temperature | -25 to 60°C (-13 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| General | |
| Management | Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP |
| LED Indicators | PWR1, PWR2, PoE, FAULT, STATE, WLAN1, WLAN2, 10M, 100M (TP port), LAN1, LAN2 (M12 port) |
| MTBF | 291,367 hrs |
| Time Management | - |
