Nexcom NIO 200 HAG Wireless Gateway
- Incorporates power redundancy (DC and PoE)
- Suitable for deployment in hazardous environments
- Wide temperature range, high EMC immunity to Surge, ESD, and EFT
- Dual Wi-Fi Mesh path establishes better stability in backbone transmission
- Full Mesh topology: robust wireless connectivity from ISA100/WirelessHART field device coverage to Wi-Fi backbone
- Perfect triple play infrastructure: video surveillance via high throughput Wi-Fi backbone ensures video transmission without compromising video performance
Description
NEXCOM NIO 200 is a powerful distributed network topology ISA100.11a access point integrating 802.11n Mesh technology. With ISA100.11a/WirelessHART technology, NIO 200 can establish full Mesh network to ensure robust and reliable communication for mission-critical industrial wireless applications. The integration of both 802.11n Mesh & ISA100.11a/WirelessHART technology gives a full Mesh infrastructure from field devices to a Wi-Fi backbone, thus concrete wireless connectivity can be assured. It’s designed to meet CID2 and ATEX-certified requirements and is the perfect solution for critical data monitoring and sensing in oil & gas, chemical plant, etc…
You can place an order for the Nexcom NIO 200 HAG Wireless Gateway, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| RF Output Power: IEEE 802.11a | 802.11a, - 28 dBm with 2 antennas, 802.11n (HT20), - 27 dBm with 2 antennas, 802.11n (HT40), - 27 dBm with 2 antennas, |
| Wireless Radio | IEEE802.11a/n x 2, MIMO 2 x 2, IEEE802.15.4, 1 Tx, 1 Rx |
| Wi-Fi Frequency Ranges | USA: 5.15~5.25 GHz, 5.725~5.825 GHz, Europe: 5.47~5.725 GHz |
| Hardware | WAN: 10/100/1000 Base-TX MDI/MDIX, LAN: 10/100/1000 Base-TX MDI/MDIX, Ethernet compliant with : - IEEE802.3/802.3u, - Hardware based 10/100/1000, full/half, flow control auto negotiation, Push buttons: 1 x reset/restore to default, LED : - 2 x Ethernet, - 2 x 11an radio, - 1 x IWSN radio, - 1 x Power/Status, N-Type : - 5 x N-type connector for NIO 200IDR/IAG/HAG, - 4 x N-type connector for NIO 200IDG |
| System Management | nCare, web GUI management, SNMP V1/V2c/V3, Event log, Syslog information support, Configuration backup and restore, One-button-click to restore factory default setting, Firmware upgrade, SNMP V1/V2c/V3 client |
| ISA100 Capabilities | Wireless Communication Interface Specifications, Standard IEEE: 802.15.4, Data Rate: 250 kbps, Modulation: Q-PSK, Spread Spectrum: DSSS, RF Output Power: Max +15 dBm, Sensitivity: -95 dBm, Connector: N type, Antenna: 2 dBi@ 2.4GHz, Performance Parameters, Scalability: NIO 200IAG: 100 field instruments, NIO 200IDG: 200 field instruments, 20 subnets, NIO 200IDR: 50 field instruments, NIO 200HAG: 250 field instruments, Mesh Network Depth: 3 hops, Field Device Join Time: As low as 20 seconds, Reporting Rate: ISA100: 1, 5, 10, 20, 30 and 60 seconds; 10 devices publishing/second, WirelessHART: 8,16,32 secs and 1-60 minutes; 10 devices publishing/second |
| Interface | |
| High-Side Communication Interfaces | Monitoring and Control System (MCS), MODBUS/ CP, Gateway Services Access Point (GSAP) (only for NIO200IAG/ IDG), HART-IP (only for NIO200HAG) |
| Power Requirement | |
| Power Requirements | 12~48 VDC, PoE (standard PoE 802.3at) |
| Physical Characteristics | |
| Dimensions | 256mm x 226mm x 91mm |
| Weight | 2.5Kg |
| Vibration Protection | random 0.3g |
| Operating Temperature | -40~75°C (altitude : up to 3000m) |
| Storage Temperature | -40~80°C |
| Standards and Certifications | UL 60950-1; 60950-22, Radio approvals, - FCC Part 15.247, 15.407, - EN 300 328, - EN 301 893, EMI and susceptibility, - FCC Part 15.107, 15.109, - EN 301 489-1, -17 |
| Humidity | 0% to 95% maximum (non-condensing) |
| Mounting | Wall/pole mountable |
| Safety Compliance | UL 60950-1; 60950-22, IEC 60950, 2nd edition, EN 60950, 2nd edition, IEC 61000-4-2 level 4 ESD immunity, IEC 61000-4-5 level 4 AC surge immunity, IEC 61000-4-4 level 4 electrical fast transient burst immunity |
| Anti-Explosive Certification | UL: Class I, Division 2, Groups A, B, C and D, T4, ATEX: Class I, Zone 2; Ex nA II, T4 |
| Security | |
| Wi-Fi Security (AP Mode) | WEP (64/128/152), WAP/WPA2 mixed, WPA2-personal (PSK+CCMP/AES), Hidden ESSID support, MAC address filtering (MAC ACL), Station isolation |
