Nexcom ICEB 8060 Computer-on-Module
- COM Express COM.0, Rev 2.0 Evaluation CRB, ATX form-factor
- Support Type 6 pin-out, COMe Extended/Basic/Compact Module
- Display: 3 x DDI (2DP/HDMI), VGA & dual channels 18/24-bit LVDS
- 4 x USB3.0/2 x SATA3.0, PCIe Gen 3.0, Bootable CFAST or Mini-SATA
- PCIex16, DDI (PCIex16), PCIex4, PCIex1 and Mini-PCIe for Wi-Fi
- VGA/RS232/422/485/5COM, Dual GbE/12USB/5.1, S/PDIF
Description
NEXCOM ICEB 8060 is a Carrier CRB of COM Express type 6, pin-out defined by PICMG, COM.0 Rev. 2.0 specification with ATX form factor. NEXCOM in-house designed features with bootable CFAST/SATA or Mini-SATA/SATA via Mini-PCIe slot (half-/full-size slot) as well as advanced 2 x SATA3.0 interfaces.
ICEB 8060 supports added-on card slots of1 x PCIex16 (up to PCIe Gen 3.0), 1 x DDI (SDVO/HDMI/DVI/DP by PCIex16 slot) 1 x PCIex4, 1 x PCIex1, and 1 x Mini-PCIe slots. Onboard Super I/O ITE8783 may support up to 6 x COM including COM2 defined by RS232/422/485 on edge I/O connector. Additional 2nd GbE LAN supported by Intel® 82574L and up to 4 x USB3.0 external devices interfaces, up to 2 x SATA 3.0 internal devices interfaces to support most- updated CPU technology from Intel® 3rd generation Core™ i7/i5/i3 of Ivy bridge-Mbl + ECC onto NEXCOM Computer-On-Module ICES 668 family together.
You can place an order for the Nexcom ICEB 8060 Computer-on-Module, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
General | |
---|---|
Form factor | ATX Carrier MB, dimension: 305mm x 244mm (12" x 9.6"), COM Express Evaluation CRB: PICMB COM Express board-to-board interconnectors, type 6 pin-put, female, 8mm stack-up height, COM.0 Rev. 2.0, NEXCOM Computer-On-Modules Support List:, Basic Size (125 x 95mm) : ICES 668 |
Expansion | 1 x PCIex16 slot, support PEG interfaces, 1 x DDI (SDVO/HDMI/DP by orange color PCIex16 slot), 1 x PCIex4 slot, optional 4 x PCIex1 signals, 1 x PCIex1 slot and 1 x Mini-PCIe slot for Wi-Fi with SIM tray |
Graphic Interfaces | Graphic Chip: from Type 6 pin-out, COM Express module, CRT: support analog VGA with DB15 connector on the I/O edge, LVDS: dual channels 18/24-bit LVDS connector (dual DF-13-20P), DDI (in PCIex16): optional EBK-A2HDMI riser card for HDMI or DP |
Super I/O | ITE8783 |
I/O Interface | Serial COM: 6 ports (1 x edge DB9 connector to support RS232/422/485 (+5/+12V by Ring)) |
Network | ETH0: LAN port Connected from COMe CPU module (ICES 668), ETH0: Support 1 x RJ45/GbE LAN port on the edge I/O, ETH1: Support 2nd RJ45/GbE LAN port by Intel® 82574L on the edge I/O ETH0 and ETH1 support Boot from LAN (PXE), ETH0 and ETH1 support Wake-on-LAN (when +5Vsb power available) |
Audio | HD Audio AL886 with 5.1 channels, Support external S/PDIF interface, Support internal pin-header for L/R speaker-out 2W/ 4 Ohm, Onboard buzzer |
EEPROM | 1 x 2K EEPROM to record PCI Express Lane configuration, ATMEL AT24C32 (or C02) and address 0 x 57 or (0 x AE) |
Watchdog Timer | Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% temperature 25°C) |
On-board RTC | On-chip RTC with battery BR2032 |
Power Requirements | |
Power Input | Standard ATX 24 pins and AUX 4-pins with 12V |
physical characteristics | |
Dimensions | ATX form factor, 305 x 244mm (Lx W, 12”x9.6”) |
Operating temperatures | -20°C to 60°C |
Storage temperature | -40°C to 85°C |
Relative humidity | Operating 10% to 90%, non-condensing |
Standards and Certifications | CE approval, FCC Class A |