Westermo Merlin-4106-T4-S1-DI1-QFT Industrial Cellular Router
- Supports Global Frequency Bands, Cat-M1 / NB-IoT
- 4 x 10/100 Mbit/s Ethernet Ports (RJ45 connector)
- 1 x Dual-use port configurable to act either as RS232 or Digital Input
- 2 x Mini-SIM (2FF) card slots
- IP40-rated ABS body material
- Din-rail mount installation design
- 9.6 to 60 VDC isolated power input
- -20°C to +70°C operating temperature range
.png)
Description
The Merlin 4100 router is
a versatile LTE cellular router suited to a variety of industrial deployments.
The compact and rugged design makes it ready for harsh environments that
require remote access such as SCADA, CCTV, telemetry, smart grid, digital signage, and intelligent traffic systems.
The Merlin series is
designed from the ground up to achieve best-in-class Cybersecurity. High-security VPNs, stateful inspection firewalls, user authentication, and 802.1x are
just a few of the features available to keep the device secure both locally and
when transmitting data over the internet or private network.
The Merlin 4100 is
compatible with the Activator Zero-Touch Deployment software. Activator ensures
that configurations are generated and deployed from a central server, reducing
configuration mistakes and increasing efficiency during the installation phase
of a project.
A dual-use port is
software-configurable to act either as an RS-232 serial port or as a dry contact
digital input. The serial port facilitates applications where it is necessary
to migrate from modems to an IP infrastructure. The industrial protocol gateway
feature enables several devices using different protocols to be accessed via a
common protocol interface. This compact unit is suited to tight spaces. Its
high MTBF, wide temperature range, and voltage supply ensure the Merlin 4100 can
deal with the demands of industrial and utility applications.
You can also find the Merlin-4106-T4-S1-DI1-PFJ, Merlin-4106-T4-S1-DI1-PFP, and Merlin-4106-T4-S1-DI1-QFZ models in the Wireless Routers.
Discover industrial automation solutions appropriate to your needs, and easily inquire about the Westermo Merlin-4106-T4-S1-DI1-QFT Industrial Cellular Router through our user-friendly website via one of our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).
Specification
| Interface | |
|---|---|
| SIM card slot | : 2 x Mini-SIM (2FF) card slots to rear, covered by plate |
| Ethernet Ports | : 4 x 10/100 Mbit/s Ports (RJ45 connector) |
| USB | |
| Digital Input and Output | : A RJ45 dual-use port. Software configurable to act either as RS-232 Serial or Digital Input (dry contact) |
| Serial port | : A RJ45 dual-use port. Software configurable to act either as RS-232 Serial or Digital Input (dry contact) |
| Alert Output | |
| Band Options | 2G Bands: 850, 900, 1800, 1900; LTE Bands: B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B26, B28 |
| Cellular Standards | Cat-M1 / NB-IoT |
| Cellular Antenna Connectors | 2 x SMA compatible connectors |
| WLAN Standards | |
| WLAN Antenna Connector | |
| GPS Antenna Connector | |
| Radio specifications | |
| Radio Connection type | - |
| Maximum data transfer speed of 2G | - |
| Maximum data transfer speed of 3G | - |
| Maximum data transfer speed of 4G | - |
| WiFi Radio Frequency | - |
| Software Specifications | |
| Routing Redundancy | VRRP |
| VPN | IPSec/L2TPv3, GRE, OpenVPN client/server, DMVPN |
| Firewall | NAT, Packet filtering, Port forwarding |
| Time Management | |
| Management | Zero-Touch Provisioning (ZTP) using Activator. Web interface (HTTPS), SMS management support, CLI via console, SSHv2, TFTP, SNMPv1/v2c/v3, Secure Copy (SCP), Flexible alarm and event system, Port monitoring, Firmware-Over-The-Air |
| General | |
| LED Indicators | : Booting up, Power, Config, SIM , 3G/LTE cellular signal strength LED, LINK LED, SPEED LED |
| MTBF | Telcordia: 1,700,000 hours |
| Operating mode | LTE Cellular Router/Gateway |
| Standards and protocols | |
| Protocols | IPv4 and IPv6, IPSec/L2TPv3/GRE/OpenVPN client/server, DMVPN, DHCP, DynDNS, NAT, NAT Traversal, NTP Client, VLAN support, Packet filtering, Port forwarding, BFD, BGPv4, OSPF, RIP (v1 and v2), SNMP v1/v2/v3, TLS 1.2, 802.1x authentication, IEC104, QoS, VRRP, VRF, Control of I/O from SCADA master, IEC 60870-5-104, IEC 60870-5-101, IEC 61850, Modbus RTU, Modbus TCP, Modbus RTU to TCP conversion, DNP3, Serial over TCP, MQTT |
| Features and capabilities | |
| Send and receive SMS | |
| Security | |
| Security and Encryption | Security: Stateful inspection firewall, RADIUS, TACACS+; Encryption: VPN encryption |
| Authentication | User authentication and 802.1x |
| Power Requirements | |
| Power Connector | Push-in spring connectors |
| Power Consumption (Output Adapter) | 5 W |
| Input Voltage | 9.6 to 60 VDC isolated |
| POE Support | |
| Input Current | 320 mA at 12 VDC, 200 mA at 24 VDC |
| Reverse Polarity Protection | Supported |
| Buttons | |
| Power button | |
| Reset | |
| Physical Characteristics | |
| Installation | DIN-rail mounting |
| Dimensions | 39 x 160 x 100 mm |
| Housing | ABS |
| Weight | 280 g |
| Operating Temperature | -20°C to +70°C |
| Storage Humidity | 5-95% relative humidity |
| Storage Temperature | -25°C to +70°C |
| Type of Use | Industrial environment |
| Standards and Certifications | Ingress protection: IP40; Telcordia; EMC: IEC/EN 61000-6-2, Immunity industrial environments, IEC/EN 61000-6-4, Emission industrial environments; Safety: EN 62368-1, Safety Communication Technology |
