Westermo BRD-355B Industrial ADSL/VDSL Router
- Fixed line broadband connection via ADSL or VDSL2
- 2 x 10/100 Mbit/s Ethernet ports (RJ-45 connector)
- 1 x RS-232 Serial port (9-pin D-sub connector)
- 1 x xDSL Port for DSL line connection (RJ-11 connector)
- IP40-rated Metal body design
- 35 mm DIN-rail mounting
- 12 to 48 VDC input power (Wide Range 10 to 60 VDC)
- Wide operating temperature range (-40 to +70°C)
.png)
Description
Remote access removes boundaries, eliminates the need for
time consuming site visits and provides a network infrastructure suitable for
today’s ”always on”-society. The BRD-355 industrial ADSL/VDSL router uses the
Internet to connect remote networks. Allowing IP enabled SCADA, HMI, PLCs,
sensors or legacy serial devices etc. to communicate with each other, a
prerequisite for any Industrial Internet (IIoT/IoT) solution.
The BRD-355 has a built-in two-port Ethernet switch and an
RS-232-port, for both new and legacy modem replacement. Designed to be
installed on a DIN rail all connectors and LEDs have been positioned on the
front of the unit, for easy access and fast status feedback.
The cybersecurity features of the BRD-355 prevent
unauthorized access and secure communication for Internet-enabled
applications. The easy-to-use firewall filters incoming and outgoing traffic,
allowing only approved packets to pass through. The BRD supports a variety of
VPN technologies to ensure that data can be sent over public or private
networks securely via SSL (OpenVPN) or IPsec. The BRD-355 has fully integrated with the easy-to-use, Westermo WeConnect high-security remote access solution.
Upgrading legacy serial or modem systems to IP-enabled, can
prove both costly and time consuming. Therefore the BRD-355 includes a wide set
of feature to allow the easy migration of the legacy serial/modem applications.
The features include interpreting the ATD modem emulation, lease line over IP
and multidrop application where a master is connected to multiple slave
locations.
You can also find the BRD-355A-AU and BRD-355A models in the
Broadband DSL Routers.
Easy World Automation offers the easiest way to buy the Westermo BRD-355B Industrial ADSL/VDSL Router in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman) at the lowest price through online inquiring. Our sales experts will contact you to fulfill all your industrial automation needs.
Specification
| Interface | |
|---|---|
| SIM card slot | |
| Ethernet Ports | : 2 x 10/100 Mbit/s TX Ports (RJ-45 connector) |
| USB | |
| Digital Input and Output | |
| Serial port | : 1 x RS-232 Serial port (9-pin D-sub connector), 300 bit/s - 115.2 kbit/s |
| Alert Output | |
| Band Options | |
| Cellular Standards | |
| Cellular Antenna Connectors | |
| WLAN Standards | |
| WLAN Antenna Connector | |
| GPS Antenna Connector | |
| Radio specifications | |
| Radio Connection type | - |
| Maximum data transfer speed of 2G | - |
| Maximum data transfer speed of 3G | - |
| Maximum data transfer speed of 4G | - |
| WiFi Radio Frequency | - |
| Software Specifications | |
| Routing Redundancy | VRRP |
| VPN | IPsec, OpenVPN (SSL VPN), L2TP, PPTP, GRE |
| Firewall | Stateful Inspection, NAT, Port Forwarding |
| Time Management | |
| Management | WeConfig, web interface (HTTP and HTTPS), Command Line Interface (CLI) via SSHv2 and Telnet, SNMPv1/v2c/v3, RFC5424/RFC3164 Syslog (log files and remote syslog server) |
| General | |
| LED Indicators | : STS, xDSL |
| MTBF | MIL-HBDK-217F: 995,000 hours |
| Operating mode | ADSL/VDSL Router/Bridge, Serial-to-Ethernet Converter |
| Standards and protocols | |
| Protocols | xDSL protocols: ADSL (B), ADSL2 (B/J), ADSL2+ (B/J), VDSL2 (8a, 8b, 8c, 8d/12a, 12b/17a), VDSL2 Vectoring |
| Features and capabilities | |
| Send and receive SMS | |
| Security | |
| Security and Encryption | |
| Authentication | Pre-shared Key (PSK), TLS |
| Power Requirements | |
| Power Connector | - |
| Power Consumption (Output Adapter) | - |
| Input Voltage | 12 to 48 VDC (Wide Range 10 to 60 VDC) with Galvanic isolation to all ports |
| POE Support | |
| Input Current | 1000 mA at 12 VDC |
| Reverse Polarity Protection | Supported |
| Buttons | |
| Power button | |
| Reset | |
| Physical Characteristics | |
| Installation | DIN-rail mounting |
| Dimensions | 53 x 103 x 92.3 mm (2.09 x 4.06 x 3.63 in) |
| Housing | Full metal |
| Weight | 0.4 kg |
| Operating Temperature | -40 to +70°C (-40 to +158°F) |
| Storage Humidity | 0-90% relative humidity |
| Storage Temperature | -50 to +85°C (-58 to +185°F) |
| Type of Use | Industrial environment |
| Standards and Certifications | Ingress protection: IP40; MIL-HBDK-217F; EMC: EN 55032, Electromagnetic compatibility of multimedia equipment - Emission Requirements, EN 55035, Electromagnetic compatibility of multimedia equipment - Immunity Requirements, including its amendments A11:2019; Safety: EN 62368-1, Audio/video, information and communication technology equipment - Part 1: Safety requirements including its amendments Nos. A11:2020 |
