Westermo ODW-710-F1 PROFIBUS to Fiber Converter
- Point-to-Point Fiber Converter PROFIBUS
- 1 x PROFIBUS Port (9 600 bit/s – 12 Mbit/s)
- 1 x 100 Mbit/s SFP Slot (LC connector)
- Up to 120 KM Typical data transmission distance on fiber
- Compact housing with integral DIN rail clip
- IP21-rated PC/ABS body material design
- Dual 10 V to 60 VDC power input
- -40 to +70°C operating temperature range
.png)
Description
The ODW-710-F1 has been designed to allow the PROFIBUS DP protocol to be transmitted point-to-point over a fiber optic link. The design allows the use of a range of Westermo-verified SFP (Small Form Pluggable) transceivers, which can provide solutions with, for example, only a single fibre or distances up to 120 km. This unit has been designed for industrial use where the requirement is for a long and reliable service life in a harsh environment. To ensure this reliable operation, we manufacture using the highest quality components.
The ODW-710 can be used on all PROFIBUS DP networks to extend the operational network size beyond the normal constraints of the copper cable. All the data rates defined in EN50170 are supported. The ODW is simple to install, being small and with a simple integral DIN rail clip. The standard PROFIBUS DP connector plugs straight onto the 9-pin D-sub, and the unit automatically detects the data rate, so no configuration is needed. The comprehensive LEDs provide a quick and easy way of detecting any network problems that may be encountered.
You can also find the ODW-710-F2, ODW-720-F1, and ODW-730-F1 models in the Fiber Optic Modems.
Easy World Automation offers the easiest way to buy the Westermo ODW-710-F1 PROFIBUS to Fiber Converter in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman) at the lowest price through online inquiring. Our sales experts will contact you to fulfill all your industrial automation needs.
Specification
| Interface | |
|---|---|
| 100Mb Fiber optic single mode (Megabit) Ports | |
| 100Mb Fiber optic multi mode (Megabit) Ports | |
| Serial port | : 1 x PROFIBUS DP port (female 9-position D-sub) |
| USB | |
| Other ports | : 1 x 100 Mbit/s SFP Slot (LC connector) |
| Isolation | : To power and status ports |
| Converter specifications | |
| Data transfer speed ( Baudrate ) | 9 600 bit/s – 12 Mbit/s |
| Maximum data transmission distance | Up to 120 km (depending on SFP module and fiber type) |
| Minimum output power converter | - |
| Sensitivity to receiving information | - |
| Wavelength | - |
| Require cable diameter | - |
| Flow Control | - |
| Protocols | PROFIBUS DP/EN 50170 |
| Serial Signals | |
| RS-232 Signals | - |
| RS-422 Signals | - |
| RS-485-2w Signals | - |
| RS-485-4w Signals | - |
| Power Requirements | |
| Power Consumption (Output Adapter) | - |
| Power Input Plugin ( Redundant ) | |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
| Input Voltage | 12 to 48 VDC and 24 VAC |
| Input Current | 300 mA @ 12 VDC, 150 mA @ 24 VDC, 75 mA @ 48 VDC |
| Connector | Detachable screw terminal |
| General | |
| Fan / Fanless | Fanless |
| MTBF | MIL HDBK-217K: 500,000 hours |
| Physical Characteristics | |
| Dimensions | 34 x 122 x 123 mm (1.34 x 4.80 x 4.84 inches) |
| Housing | PC/ABS |
| Installation | Din-rail mounting |
| Operating Temperature | -40 to +70°C (-40 to +158°F) |
| Operation Humidity | 5-95% relative humidity |
| Standards and Certifications | EMC: EN/IEC 61000-6-1, Immunity residential environments, EN/IEC 61000-6-2, Immunity industrial environments, EN/IEC 61000-6-3, Emission residential environments, EN/IEC 61000-6-4, Emission industrial environments; Trackside: EN 50121-4/IEC 62236-4, Railway signalling and telecommunications apparatus; Marine: DNV rules for classification - Ships and offshore units; Safety: UL/CSA 60950-1, IT equipment; IP21; MIL-HBDK-217F; Vibration: IEC 60068-2-6; Shock: IEC 60068-2-27 |
| Storage Temperature | -40 to +70°C (-40 to +158°F) |
| Weight | 260 gr |
| LED Indicators | |
| LED Per Port | |
| Power | |
