Easy World Automation | Nexcom VTC 6210-BK In-Vehicle Computer

Nexcom VTC 6210-BK In-Vehicle Computer

  • Three SIM cards + dual WWAN modules support
  • Built-in U-blox M8N GPS, optional dead reckoning support
  • Built-in CAN Bus 2.0B. Optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
  • Wake on RTC/SMS via WWAN module
  • Compliant with MIL-STD-810G
  • 4 x mini-PCIe socket expansion
  • Programmable 8 x GPIO

Description

VTC 6210, based on Intel® Core™ quad-core processor E3845 (1.91GHz), is specifically designed for the harsh in-vehicle environment. It allows VTC 6210 to comply with stringent MIL-STD-810G military standards in the rugged, fanless, and compact mechanism. VTC 6210 provides complete communication capability between automotive and computer with a built-in CAN BUS 2.0B interface. An optional OBDII interface (J1939) is also available for vehicle diagnostics. VTC 6210 features rich PAN, WLAN, and WWAN wireless connectivity. With dual SIM cards support, VTC 6210 allows three SIM cards back up each other for better connectivity quality by software. In addition, three SIM cards and dual WWAN modules architecture can increase the bandwidth for a faster data transmission speed. Not only data transmission but VTC 6210 also supports two-way voice communication. Equipped with intelligent power management,

VTC 6210 can be waked on by ignition, RTC timer, or SMS message remotely. By integrating the variety of I/O ports and 4 x mini-PCIe sockets expansibility, VTC 6210 keeps the flexibility to meet the demand for different telematics applications, such as infotainment, fleet management, dispatching systems, and video surveillance.


You can place an order for the Nexcom VTC 6210-BK In-Vehicle Computer, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

General
CPU Intel® Atom™ processor quad core E3845, 1.91GHz
Memory 1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up to 8GB. Default 2GB
Expansion 1 x Full size mini-PCIe socket (USB 2.0), 1 x Full size mini-PCIe socket (USB 2.0), 1 x Full size mini-PCIe socket (USB 2.0 + PCIe), 1 x Half size mini-PCIe socket (USB 2.0 + PCIe)
Function 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning, Built-in G-sensor
Storage 1 x 2.5" SSD/HDD SATA 2.0 (externally accessible, optional lockable storage available), 1 x CFast (externally accessible)
Interface
I/O Interface-Front 4 x LED for power, storage, WWAN, WLAN, 2 x Externally accessible SIM card socket (selectable), 1 x Phone jack 3.5mm for 1 x Mic-in, 1 x Phone jack 3.5mm for 1 x Line-out, 1 x Externally accessible 2.5" SATA 2.0 SSD/HDD tray, 1 x Externally accessible CFast card socket with cover, 1 x Event button (trigger type), 1 x Reset button, 1 x Type A USB 3.0 compliant host, supporting system boot up, 4 x Antenna hole for WWAN/WLAN/BT
I/O Interface-Rear 1 x 9 ~ 36VDC input with ignition and 19W typical power consumption, 2 x Type A USB 2.0 compliant host, supporting system boot up, 2 x RJ45 10/100/1000 Fast Ethernet with LED, 1 x Phone jack 3.5mm for 1 x Mic-in, 1 x Phone jack 3.5mm for 1 x Line-out, 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz, 1 x DP port, resolution up to 2560 x 1600 @60H, 1 x Antenna hole for GPS, 2 x DB-9 RS-232 (RI/12V selectable), 1 x DB-9 RS-422/485, 1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B mini-PCIe card), 2 x MCU-DI and 2 x MCU-DO, 1 x 16-pin terminal block, - 1 x CAN Bus 2.0B (on board), - 1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939), - 8 x GPIO (Programmable Digital Input or optional isolation), Input Voltage (internal type): 5VDC TTL (default), Input Voltage (source type): 3 ~ 12VDC (Programmable digital input and digital output), Digital output (sink type): 5VDC TTL (default), max current: 20mA, Digital output (source type): 3 ~ 24VDC, max current: 150mA, 1 x 12VDC output (2A), SM Bus
Power Requirement
Power Management Selectable boot-up & shut-down voltage for low power protection by software, Setting 8-level power on/off delay time by software, Status of ignition and low voltage can be detected by software, Support S3/S4 suspend mode
Physical Characteristics
Dimensions 260mm (W) x 176mm (D) x 50mm (H) (10.24" x 6.93" x 1.97")
Operating temperatures -30°C to 70°C (w/ industrial SSD) with air flow, -20°C to 50°C (w/ commercial HDD) with air flow
Storage temperatures -35°C to 85°C
Humidity 10% to 90% (non-condensing)
Weight 2.1kg
Environment Vibration (random): 1g@5 ~ 500 Hz (in operation, HDD), 2g@5 ~ 500 Hz (in operation, SSD), Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier, US highway truck vibration exposure, Storage: MIL-STD-810G, Method 514.6, Category 24, minimum, Operating: MIL-STD-810G, Method 516.6, Procedure I, functional, Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash, hazard shock test=75g
Standards/Certifications CE approval, FCC Class A, E13 Mark
Compatible Operating Systems
Operating System Windows 8, WES8, Windows 7, WES7, Fedora, Wind River® Intelligent Device Platfrom XT 2.0