Nexcom VTC 1010 In-Vehicle Computer
- Compliant with MIL-STD-810G
- Intel® Atom™ processor E3827, 1.75GHz
- Dual SIM cards + dual WWAN modules support
- Wide operating temperature -30°C ~ 70°C
- 4 x mini-PCIe socket rich expansion capability
- Wake on RTC/SMS via WWAN module
- Voice communication via WWAN module
- Built-in U-blox M8N GPS, optional dead reckoning support
- Built-in CAN 2.0B. Optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
Description
VTC 1010 features next-generation Intel® Atom™ processor E3827, 1.75GHz, with powerful graphic and multimedia enhancement. VTC 1010 is packed with rugged, fanless, and 1 DIN compact enclosure. It is specifically designed to comply with stringent MIL-STD-810G military standards. VTC 1010 comes with a built-in CAN BUS 2.0B interface and optional OBDII (SAE J1939) port to monitor the vehicle operating status in real-time and troubleshoot a non-working vehicle. With dual SIM card design, it allows the choice of the best service carrier network and minimizes roaming costs. VTC 1010 can be configured to work with two independent WWAN connections and can effectively increase the bandwidth for faster massive data transfer over the air. VTC 1010 also supports two-way voice communication. Equipped with intelligent vehicle power management, VTC 1010 can be waked up by ignition, RTC timer, or remote dial-up for flexible operation or maintenance. VTC 1010 can satisfy different demands for versatile telematics applications, such as infotainment, fleet management, dispatching systems, and mobile video surveillance.
You can place an order for the Nexcom VTC 1000 In-Vehicle Computer, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| CPU | Intel® Atom™ processor E3827, Dual Core 1.75GHz |
| Memory | 1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up to 8GB. Default 2GB |
| Expansion | 1 x Full size mini-PCIe socket (USB 2.0), 1 x Full size mini-PCIe socket (USB 2.0+ PCIe), 1 x Full size mini-PCIe socket (mSATA or PCIe), 1 x Half size mini-PCIe socket (USB 2.0 + PCIe) |
| Function | 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning, Built-in G-sensor, Gyroscope, and e-Compass sensors |
| Storage | 1 x 2.5" SATA 2.0, 1 x External accessible SD card socket |
| Interface | |
| I/O Interface-Front | 8 x LED for power, system status, storage, WWAN, WLAN, GPS, LAN, GPIO, 2 x External accessible SIM card socket (selectable) with cover, 1 x Audio jack 3.5mm for WWAN voice communication, including 1 x Mic-in and 1 x Line-out, 1 x External accessible SD card socket with cover, 1 x Event button (trigger type), 1 x Reset button., 1 x Type A USB 3.0 compliant host, supporting system boot up |
| I/O Interface-Rear | 1 x 9 ~ 36VDC input with ignition and 11W typical power consumption, 1 x Type A USB 2.0 compliant host, supporting system boot up, 1 x RJ45 10/100/1000 Fast Ethernet with LED, 1 x Phone jack 3.5mm for 1 x Mic-in (for WWAN voice communication), 1 x Phone jack 3.5mm for 1 x Line-out (for PC audio), 1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz, 1 x DP port. Resolution up to 2560 x 1600 @60Hz, 1 x DB-9 for RS-232, 4 x Antenna hole for GPS/WWAN/WLAN/BT, 1 x LHF 60-pin connector, 1 x 6-pin power connector, 12VDC output (max: 1A), 1 x Type A female USB 2.0 compliant host, supporting system boot up, 1 x DB-9 RS-232, 1 x DB-9 RS-422/485, 1 x DB-9 female 3 x DI and 3 x DO. On board CAN 2.0B signals, (Programmable Digital Input), Input voltage (Internal Type): 5VDC TTL (default), Input voltage (Source Type): 3 ~ 12VDC, (Programmable Digital Output), Digital output (Sink Type): 5VDC TTL (default), max current: 20mA, Digital output (Source Type): 3 ~ 24VDC, max current: 250mA, 1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939), 1 x DB-9 for optional GPS Dead Reckening module, 4 x BNC connector Video-In for optional 4-channel video capture card, 4 x Audio connector for 7.1 channel audio output (front, center/woofer, rear surround, side surround) |
| Power Requirement | |
| Power Management | Selectable boot-up & shut-down voltage for low power protection by software, Setting 8-level power on/off delay time by software, Status of ignition and low voltage can be detected by software, Support S3/S4 suspend mode |
| Physical Characteristics | |
| Dimensions | 180mm (W) x 180mm (D) x 50mm (H) (7.09" x 7.09" x 1.97") |
| Operating temperatures | -30°C to 70°C (w/ industrial SSD) with air flow, -20°C to 50°C (w/ commercial HDD) with air flow |
| Storage temperatures | -35°C to 85°C |
| Humidity | 10% to 90% (non-condensing) |
| Weight | 1.7kg |
| Environment | Vibration (random): 1g@5 ~ 500 Hz (in operation, SSD), Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier, US highway truck vibration exposure, Storage: MIL-STD-810G, Method 514.6, Category 24, minimum, Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g, Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock |
| Standards/Certifications | CE approval, FCC Class B, E13 Mark |
| Compatible Operating Systems | |
| Operating System | Windows 8 Professional, WES8, Windows 7, WES7, Tizen IVI, Fedora, Wind River® Intelligent Device Platfrom XT 2.0 |
