Nexcom VTC 1000 In-Vehicle Computer
- Compact and fanless design
- Built-in GPS receiver with optional dead reckoning function
- Variety Wireless communication options
- Built-in CAN Bus 2.0B (from EG20T)
- Wide range DC input from 6~ 36V
- Certified by CE/FCC/e13 Mark
- Smart power management with Ignition on/off delay via
software Control and low voltage protection
Description
VTC 1000, a compact rugged computer box, is designed for the transportation segment, especially for vehicles with limited space to house the computer system. Same as all VTC series, the fanless and wide temperature support is reserved in VTC 1000 design. VTC 1000 adopts Intel® Atom™ E640 processor.
VTC 1000 does not compromise its space to scarify its functional features. An advanced GPS receiver with dead reckoning is available as an option as well as wireless communication. VTC 1000 is the best choice with a cost-effective solution for your vehicle application.
You can place an order for the Nexcom VTC 1000 In-Vehicle Computer, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| CPU | Intel® Atom™ E640 1.0GHz |
| Memory | On-board DDR2 up to 2GB |
| Expansion | 1 x mini-PCIe socket (PCIe + USB) for WLAN option, 1 x mini-PCIe socket (USB) x 1 for WWAN option, 1 x Bluetooth module for option, 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning |
| Main Chipset | EG20T |
| Expandable Storage | 1 x 2.5" SATA II SSD Bay |
| Interface | |
| I/O Interface-Front | 1 x Power button, 2 x LED indicators for power and storage, 1 x System reset button, 2 x USB 2.0 host type A connector, 1 x RJ45 with LEDs for 10/100/1000Mbps Ethernet, 1 x DB9 RS-232, 1 x SIM card socket, 1 x Line-out, 1 x Mic-in (for WWAN CM8000 voice communication), 3 x Antenna hole reserved for SMA-type antenna connector (WWAN/WLAN/BT) |
| I/O Interface-Rear | 1 x 6 ~ 36VDC input with Ignition and 15W typical power consumption, 1 x 5V/1A and 12V/1A DC output, SMBus, 1 x DB9 COM port selected by SW5 & BIOS, - 1 x RS232 Full (Default), - 1 x RS232 (Tx,Rx) + 1x RS422/485, 1 x DB9 COM port selected by BIOS, - 4 x GPI, - 4 x GPO, - 2 x GPO + CAN Bus 2.0B (Default), 1 x DB15 VGA (optional DB26 LVDS interface with 12V and USB 2.0), 1 x SMA-type GPS antenna connector |
| Power Requirement | |
| Power Management | Selectable boot-up & shut-down voltage for low power protection, HW design ready for 8-level delay time on/off at user's self configuration, Power on/off ignition, software detectable, Support S4 suspend mode |
| Physical Characteristics | |
| Dimensions | 185mm (W) x 120mm (D) x 40mm (H) (7.3" x 4.7" x 1.6") |
| Operating temperatures | -30°C to 70°C (w/ industrial SSD) with air flow, -20°C to 60°C (w/ commercial HDD) with air flow |
| Storage temperatures | -40°C to 80°C |
| Humidity | 10% to 90% (non-condensing) |
| Housing | Aluminum top case with sheet metal |
| Weight | 1 Kg (2.20 Lb) |
| Environment | Vibration (random): 2g @5 ~ 500 Hz, Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle – Highway Truck, Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test, Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and semi-trailers=20g, Crash hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment=75g |
| Standards/Certifications | CE approval, FCC Class B, e13 Mark |
| Compatible Operating Systems | |
| Operating System | Windows XP/WES2009, WinXP Pro for Embedded, Win7 Pro for Embedded |
