MOXA VPort 06-2M80M-T Onboard IP Camera
- Lens: 8.0 mm
- 1 x 10/100BaseT(X) Port (M12 connector)
- 1 x Audio Input (built-in microphone)
- IP66-rated Metal housing with PC dome cover
- Panel mount installation design
- 12/24 VDC input power range (DB9 connector)
- -40 to 70°C Operating Temperature range
.png)
Description
The VPort 06-2 cameras are compact, 1080P (1920 x 1080), and
H.264/MJPEG dome IP cameras are designed for mobile video surveillance
applications. The cameras are compliant with EN 62262 IK8, mandatory sections
of EN 50155, and support a -25 to 55°C
or -40 to 70°C operating temperature range. With a rugged M12 Ethernet port,
SDXC slot for SD cards up to 1 TB, ONVIF Profile S standardization, built-in
audio line port or microphone, PoE or 24 VDC power inputs, IP66-rated, and the
option of changing the lens, the VPort 06-2 cameras will perform reliably in a
variety of extreme environmental conditions, making them suitable for a wide
variety of mobile video surveillance applications.
You can also find the VPort 06-2M80M and VPort 06-2M60M-T models in the IP Cameras.
Discover industrial automation solutions appropriate to your
needs, and easily inquire about the MOXA VPort 06-2M80M-T Onboard IP Camera through our user-friendly website via
one of our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and
Oman).
Specification
| Camera | |
|---|---|
| Sensor | 1/3-in 1080P progressive scan CMOS |
| Lens | f=8.0 mm, F1.6, Diagonal 42°, Horizontal 33°, Vertical 17° |
| Camera Angle | Pan: ±15°, Tilt: 0° to 90° (controlled manually) |
| ICR Control (for day & night) | - |
| Synchronization | Internal |
| White Balance | ATW/AWB |
| DNR | Built-in 2D/3D DNR |
| WDR | 100 dB |
| Flickerless Control | Automatic, 50 Hz, 60 Hz modes |
| Image Rotation | Flip, Mirror, 90°, 180°, 270° rotation |
| Image Setting | Manual tuning with saturation, sharpness, and contrast |
| AGC (auto gain control) | 2X, 4X, 8X, 16X |
| Minimum Illumination | Color: 0.2 lux, at F1.2 (Gain High, 50 IRE, 1/30 sec) |
| Electronic Shutter | Auto, Fixed (1/30 to 1/25000 sec) |
| S/N Ratio | Maximum 50 dB (AGC off; DNR on) |
| Interface | |
| 10/100BaseT(X) Ports | : 1 Port (M12 D-coded 4-pin female connector) |
| PoE Ports | |
| Digital Input/Output Channels | : 1 x Digital Input Channel (DB9 male connector) |
| Relay Channels | |
| Audio | |
| Audio Inputs | 1 x built-in microphone |
| Audio Format | Mono, PCM (G.711) AAC |
| Audio Outputs | |
| Video | |
| Video Compression | H.264 (ISO/IEC 14496-10) or MJPEG |
| Video Output | via Ethernet |
| Video Streams | 4 independent H.264 or MJPEG video streams |
| Video Viewing | DynaStream™ support for changing the video frame rate automatically, CBR Pro™ for good image quality in limited bandwidth transmissions, 3 privacy mask areas provided, Adjustable image size and quality, Timestamp and text overlay, OSD (On Screen Display) position adjustable, Maximum of 10 simultaneous unicast connections, 50 multicast clients |
| Network | |
| Protocols | TCP/IP, IPv4/IPv6, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, NTP Client, DNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, DHCP Opt66/67, HTTPS, SIP |
| Power Requirements | |
| Input Voltage | 12/24 VDC (DB9 connector) |
| Input Current | 0.86 A @ 12 VDC; 0.35 A @ 24 VDC |
| Source of Input Power | - |
| Alarms | |
| Intelligent Video | Camera tampering detection |
| Video Motion Detection | 3 independently configurable areas |
| Scheduling | Daily repeat timing schedule |
| Imaging | JPEG snapshots for pre/trigger/post alarm images |
| Custom Alarms | HTTP event servers for setting customized alarm actions |
| Email/FTP Messaging | Automatic transfer of stored images via FTP as event-triggered actions |
| Pre-alarm Buffer | 50 MB video buffer for JPEG snapshot images |
| Security | |
| Password | User-level password protection |
| Filtering | IP address |
| Encryption | HTTPS, SSH |
| Authentication | |
| General | |
| MTBF | 1,039,008 hrs |
| microSD Slot | SDXC |
| Physical Characteristics | |
| Housing | IP66 rain and dust protection, Metal housing, PC dome cover, IK8 vandal resistant protection |
| Dimensions | 110 x 115.5 x 61.8 mm (4.33 x 4.53 x 2.43 in) |
| Weight | 620 g (1.37 lb) |
| Installation | Panel mounting |
| Operating Temperature | -40 to 70°C (-40 to 158°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Standards and Certifications | EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF; Freefall: IEC 60068-2-31; Railway Fire Protection: EN 45545-2; Safety: UL 62368-1; Shock: IEC 60068-2-27, IEC 61373, EN 50155; Vibration: IEC 60068-2-64, IEC 61373, EN 50155; Railway: EN 50155 (complies with a portion of EN 50155 specifications); Ingress Protection: IEC 60529, IP66; Vandal Resistance: EN 62262, IK8; Telcordia SR332 |
| Altitude | 2000 m |
| Minimum Viewing System Requirements | |
| Memory Size | 2 GB |
| Operating System | Windows 7 or above |
| Browser | Internet Explorer 9.x or above |
| Multimedia | DirectX 9.0C or above |
| Software Development | |
| VPort SDK PLUS | - |
| Standard | ONVIF Profile S |
