MOXA CSM-200-1218 slide-in Ethernet-to-Fiber Media Converters
- 1 x 10/100Mbps T(x) port and 1 x 100Mbps F(x) single-mode port with SC connector
- 12 VDC input power
- 0 to 55°C operating temperature
- LFP (Link Fault Pass-Through) and FEF (Far End Fault)
- Two different operation modes: store-and-forward and pass-through
- Auto-negotiation
- Plug and play
- Hot-swappable
Description
The CSM-200 slide-in Ethernet-to-fiber media converters are designed for the NRack System™. The modules provide media conversion from 10/ 100BaseT(X) to 100BaseFX (SC/ST connectors) and can be installed in any NRack System™ chassis.
You can also find the CSM-200-1213 and CSM-200-1214 models in the Industrial Media Converters.
You
can Buy the MOXA CSM-200-1218 slide-in Ethernet-to-Fiber Media Converters via inquiring online at competitive prices in the Middle
East (UAE (Dubai), KSA (Al Khobar, Riyadh), and
Oman). Enjoy the cost-effective shipping options
at a specific time in your location.
Specification
| Interface | |
|---|---|
| 10/100Mb RJ45 (Megabit) Ports | : 1 Port |
| 10/100/1000Mb RJ45 (Gigabit) Ports | |
| 100Mb Fiber optic multi mode (Megabit) Ports | |
| 100Mb Fiber optic single mode (Megabit) Ports | : 1 SC Port |
| 1000Mb SFP Fiber optic (Gigabit) Ports | |
| M12 port | |
| Alert Output | |
| Standards and protocols | |
| Protocols and work standards | IEEE 802.3u for 100BaseT(X) and 100BaseFX |
| General | |
| Maximum cable length for data transfer | 40Km with single mode fiber optic cable |
| MTBF | 1,454,560 hrs |
| Power Requirements | |
| Power consumed | 180 mA @ 12 VDC |
| Type of power input | - |
| POE Support | |
| Protection against overflow | |
| LED Indicators | |
| LNK/ACT | |
| Buttons | |
| DIP Switch | |
| Physical Characteristics | |
| Standards and Certifications | EMC, EMI, EMS, Safety, Vibration, Environmental Testing |
| Housing | - |
| Dimensions | 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in) |
| Weight | 0.125Kg |
| Operating Temperature | 0 to 55°C (32 to 131°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operation Humidity | 5 to 95% (non-condensing) |
| Installation | can be installed in any NRack System™ chassis |
