MOXA CSM-200-1218 slide-in Ethernet-to-Fiber Media Converters
- 1 x 10/100BaseT(X) Ports (RJ45 connector)
- 1 x 100BaseFX Ports (single-mode SC connector)
- 40 KM Typical data transmission distance on fiber
- 12 VDC input power range
- LFP (Link Fault Pass-Through) and FEF (Far End Fault)
- 0 to 55°C operating temperature range
Description
The CSM-200 slide-in Ethernet-to-fiber media converters are designed for the NRack System™. The modules provide media conversion from 10/ 100BaseT(X) to 100BaseFX (SC/ST connectors) and can be installed in any NRack System™ chassis.
You can also find the CSM-200-1213 and CSM-200-1214 models in the Industrial Media Converters.
You
can Buy the MOXA CSM-200-1218 slide-in Ethernet-to-Fiber Media Converters via inquiring online at competitive prices in the Middle
East (UAE (Dubai), KSA (Al Khobar, Riyadh), and
Oman). Enjoy the cost-effective shipping options
at a specific time in your location.
Specification
| Interface | |
|---|---|
| 10/100Mb RJ45 (Megabit) Ports | : 1 Port |
| 10/100/1000Mb RJ45 (Gigabit) Ports | |
| 10/100Mb (Megabit) POE Ports | |
| 100Mb Fiber optic multi mode (Megabit) Ports | |
| 1000Mb Fiber optic multi mode (Gigabit) Ports | |
| 100Mb Fiber optic single mode (Megabit) Ports | : 1 Port (SC connector) |
| 1000Mb Fiber optic single mode (Gigabit) Ports | |
| 1000Mb SFP Fiber optic (Gigabit) Ports | |
| M12 port | |
| Alert Output | |
| Magnetic Isolation Protection | 1.5 kV (built-in) |
| Standards and protocols | |
| Protocols and work standards | IEEE 802.3u for 100BaseT(X) and 100BaseFX |
| General | |
| Maximum cable length for data transfer | 40 KM |
| MTBF | 1,454,560 hrs |
| Power Requirements | |
| Input Voltage | 12 VDC |
| Input Current | 180 mA @ 12 VDC |
| Overload Current Protection | Supported |
| Type of power input | - |
| Power Consumption | 180 mA @ 12 VDC |
| Physical Characteristics | |
| Standards and Certifications | EMC: EN 55032/24; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-5 Surge: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF, IEC 61000-4-11 DIPs; Environmental Testing: IEC 60068-2-1, IEC 60068-2-14, IEC 60068-2-2, IEC 60068-2-3; Safety: EN 60950-1, UL 60950-1; Vibration: IEC 60068-2-6; Telcordia (Bellcore), GB |
| Housing | - |
| Dimensions | 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in) |
| Weight | 0.125Kg |
| Operating Temperature | 0 to 55°C (32 to 131°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operation Humidity | 5 to 95% (non-condensing) |
| Installation | Can be installed in any NRack System™ chassis |
