MOXA CSM-G200-1221 slide-in Ethernet-to-Fiber Media Converter
- 1 x 10/100Mbps T(x) port and 1 x 100Mbps F(x) multi-mode port with SC connector
- Fiber Module Type: SFP
- 12 VDC input power
- 0 to 55°C operating temperature
- LFP (Link Fault Pass-Through) and FEF (Far End Fault)
- Two different operation modes: store-and-forward and pass-through
- Auto-negotiation
- Plug and play
- Hot-swappable
Description
The CSM-G200 slide-in Ethernet-to-fiber media converters are
designed for the NRack System™. The module provides media conversion from
10/100/1000BaseT(X) to 100/1000BaseFX (SFP connector) and can be installed in
any NRack System™ chassis.
You can also find the CSM-200-1218 model in the Industrial Media Converters.
Enjoy the ease of online inquiries for the MOXA CSM-G200-1221 slide-in Ethernet-to-Fiber Media Converter. You can
submit your inquiry on our website and get the friendliest communication with
our experts to choose high-quality industrial automation products at a
reasonable price from our Middle East branches (UAE (Dubai), KSA (Al Khobar,
Riyadh), and Oman).
Specification
| Interface | |
|---|---|
| 10/100Mb RJ45 (Megabit) Ports | : 1 Port |
| 10/100/1000Mb RJ45 (Gigabit) Ports | |
| 100Mb Fiber optic multi mode (Megabit) Ports | |
| 100Mb Fiber optic single mode (Megabit) Ports | |
| 1000Mb SFP Fiber optic (Gigabit) Ports | |
| M12 port | |
| Alert Output | |
| Standards and protocols | |
| Protocols and work standards | - |
| General | |
| Maximum cable length for data transfer | 5Km with multi-mode fiber optic cable |
| MTBF | 1,579,447 hrs |
| Power Requirements | |
| Power consumed | 185 mA @ 12 VDC |
| Type of power input | - |
| POE Support | |
| Protection against overflow | |
| LED Indicators | |
| LNK/ACT | |
| Buttons | |
| DIP Switch | |
| Physical Characteristics | |
| Standards and Certifications | EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF: 30 A/m; Environmental Testing: IEC 60068-2-1, IEC 60068-2-14, IEC 60068-2-2, IEC 60068-2-3; Vibration: IEC 60068-2-6 |
| Housing | - |
| Dimensions | 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in) |
| Weight | 140 g (0.31 lb) |
| Operating Temperature | 0 to 55°C (32 to 131°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operation Humidity | 5 to 95% (non-condensing) |
| Installation | can be installed in any NRack System™ chassis |
