Beijer ST-1114 Digital input module

  • 4 digital inputs
  • 5 VDC
  • Positive logic (PNP)

Description

The FnIO S series is a micro modular remote IO-system from Crevis, which contains a wide selection of digital and analog modules as well as special modules. Together with a selected bus/ node module, the system is easily combined to make standalone IO-nodes.

The IO-system, which has an IP20 enclosure, is installed on a standard 35 mm DIN rail. Stable communication between the modules in the node is guaranteed via a unique sliding contact system.

A standard IO module is only 12 mm in width, and when using 16 channel IO modules a complete node is made up of 64 IOs of only 90 mm in width.

The FnIO S series supports known bus systems such as Profibus DP/V1, CC-Link, CANopen, Modbus-TCP, Modbus-RS232, and Modbus-RS485.

Specification

Power Requirements
Current consumption 35 mA @ 5.0V DC
Input specification
Input type Sink Type (Positive Logic)
Number of inputs 4
ON -state voltage 12/24 V DC (10.2-28.8V)
OFF-state voltage Max. 0.8V DC
ON-state current Max. 4.5 mA @5.5VDC
Nominal input impedance Typical 1.3 kΩ
Input delay OFF to ON: Max. 0.5ms / ON to OFF: Max. 0.5ms
Filtering time Typical 1.5ms (software filtering)
Output specification
I/O connector Removable terminal block, cage clamp
Physical Characteristics
Mechanical size 12 mm x 99 mm x 70 mm
Module weight 70 g
System indicators 4 green input state, 1 green/red Bus state