Nexcom VTC 7230 In-Vehicle Computer
- Intel® Core™ processor dual-core i3-5010U
- Three SIM cards + dual WWAN modules support
- Dual accessible & hot-swappable SATA 3.0 SSD/HDD (RAID 0/1)
- Built-in u-blox NEO-M8N module, optional Dead Reckoning support
- Built-in CAN 2.0B. Optional CAN/OBDII module
- Wake on RTC/SMS via WWAN module
- Voice communication via WWAN module
- Compliant with MIL-STD-810G
- 4 x mini-PCIe socket rich expansion capability
Description
VTC 7230 features a powerful new generation Intel® Core™ processor i3-5010U. Its CPU performance gives the users the ability to adapt to what they need in any telematics application. Its powerful graphic engine allows users to fully take advantage of VTC 7230 to achieve smooth, seamless, and stunning graphic performance on 3 different video outputs (VGA, DP, LVDS). VTC 7230 is equipped with 2 externally accessible SSD/HDD trays; users can easily download or upload the data on other devices by just removing the storage devices from VTC 7230. By integrating the variety of I/O ports and 4 x mini-PCIe sockets expansibility, VTC 7230 is not only suitable for video surveillance applications but also can meet the demand for other telematics applications, such as infotainment, fleet management, and dispatching systems. With dual SIM cards support, VTC 7230 allows three SIM cards back up each other for better connectivity quality by software. In addition, three SIM cards + dual WWAN modules architecture can increase the bandwidth for a faster data transfer speed. Not only data transmission but VTC 7230 also supports two-way voice communication. With intelligent power management, VTC 7230 can be waked on by ignition, RTC timer, or SMS/Ring remotely.
You can place an order for the Nexcom VTC 7230 In-Vehicle Computer, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| CPU | Intel® Core™ processor dual core i3-5010U, 2.1GHz |
| Memory | 2 channel 204-pin DDR3L SO-DMIM socket support 1333/1600MHz up to 16GB, default Industrial grade 2GB |
| Expansion | 1 x Full size mini-PCIe socket (USB 2.0), 1 x Full size mini-PCIe socket (USB 2.0 + PCIe), 1 x Full size mini-PCIe socket (USB 2.0 + PCIe), 1 x Half size mini-PCIe socket (USB 2.0 + PCIe) |
| Function | 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning, Built-in G-sensor |
| Storage | 2 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported (optional lockable storage available), 1 x CFast (externally accessible) |
| Interface | |
| I/O Interface-Front | 4 x LED for power, storage, WWAN, WLAN, 2 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported (optional lockable storage available), 1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port, 2 x Externally accessible SIM card socket (selectable), 1 x Phone jack 3.5mm for 1 x Mic-In, 1 x Phone jack 3.5mm for 1 x Line-out, 1 x Externally accessible CFast card socket with cover, 1 x Event button (trigger type), 1 x Reset button, 3 x Antenna hole for WWAN/WLAN/BT |
| I/O Interface-Rear | 1 x 9 ~ 36VDC input with ignition and 35W typical power consumption, 1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port, 2 x RJ45 10/100/1000 Fast Ethernet with LED, 1 x Phone jack 3.5mm for 1 x Mic-in, 1 x Phone jack 3.5mm for 1 x Line-out with 1.5W output each, 1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz, 1 x DP port. Resolution up to 2560 x 1600 @60Hz, 2 x DB-9 RS-232, 1 x DB-9 RS-232/422/485 (RI/12V selectable), 1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B mini-PCIe card), 2 x MCU-DI and 2 x MCU-DO, 1 x 16-pin terminal block, - 1 x CAN Bus 2.0B (on board), - 1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939), - 8 x Programmable GPIO, (Digital Input) Input voltage (internal type): 5VDC TTL (default), Input voltage (source type): 3 ~ 12VDC, (Digital Output) Digital output (sink type): 5VDC TTL (default), max current: 20mA, Digital output (source type): 3 ~ 24VDC, max current: 150mA, 1 x 12VDC output (2A), SM Bus, 4 x antenna hole for WWAN/WLAN/BT/GPS, 1 x Fuse (15A) |
| Power Requirement | |
| Power Management | Selectable boot-up & shut-down voltage for low power protection by software, Setting 8-level power on/off delay time by software, Status of ignition and low voltage can be detected by software, Support S3/S4 suspend mode |
| Physical Characteristics | |
| Dimensions | 260mm (W) x 206mm (D) x 79.5mm (H) (10.24" x 8.11" x 3.13") |
| Operating temperatures | -30°C to 55°C (w/ industrial SSD) with air flow, -20°C to 45°C (w/ commercial HDD) with air flow |
| Storage temperatures | -35°C to 85°C |
| Humidity | 10% to 90% (non-condensing) |
| Weight | 2.5kg |
| Environment | Vibration (random): 1.5g@5 ~ 500 Hz (in operation, HDD), 2g@5 ~ 500 Hz (in operation, SSD), Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure, Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test, Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g, Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock |
| Compatible Operating Systems | |
| Operating System | Windows 8, WES8, Window 7, WES7, Linux kernel 3.X |
