Nexcom AXE-5904 EtherCAT Slave Module
- Support CiA 402 device profile
- General purpose I/O: 12 DI and 3 DO
- Pulse output options: CW/ CCW, OUT/DIR
- 4x differential encoder interface, ABZ phase
- EtherCAT slave protocol communication
- 4-axis independent control and pulse output up to 8Mpps
Description
AXE-5904 is a 4-axis pulse type point-to-point motion EtherCAT slave module, featuring real-time EtherCAT communication and CiA 402 device profile for machine automation applications requiring high-speed and point-to-points function. With pulse type commands, AXE-5904 supports pulse output rate up to 4MHz and encoder input up to 8MHz in 4 xAB phase mode and built-in dedicated I/O points for servo control and mechanism to facilitate building up whole machines.
You can place an order for the Nexcom AXE-5904 EtherCAT Slave Module, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
General | |
---|---|
Pulse Type Motion Control | Number of axes: 4, Pulse output rate: up to 8pps, Pulse command output: CW/ CCW, OUT/DIR, ABZ Phase, Committed I/O Signal: ±LIM/±CMP/ORG/SVON/RDY/INP/ALM/ALMCLR/DCLR for each axis |
Encoder Input | Encoder input type: Incremental, 32-bit, Encoder signal: CW/ CCW, AB/Z, Positioning Range: -2,147,483,648 through 2,147,483,647 pulse (32-bit), Max. input frequency: 4MHz |
Common Section | Data transfer medium: Ethernet cable (min CAT 5), shield, Bus interface: 2x RJ-45, Data transfer rate: 100M baud, Protocol: EtherCAT, Device profile: CiA 402, Enclosure type rating: IP00 |
Interface | |
General I/O | General-purpose input: 3 channel per axis, Input type: photo-coupler input (corresponding to current sink output), Response time of DI (Max.): 100 μsec, General-purpose output: 2 channel per axis, Response time of DO (Max.): 100 μsec |
Power Requirements | |
Power Requirements | DC input range: DC 24V ±10% with over-voltage and reversed-voltage protection |
Physical Characteristics | |
Operating temperature | 0°C to 50°C |
Dimensions | 120.1(W) x 188(L) x 55.6(H) |
Mounting | DIN-rail |
Humidity | 35~85%, non-condensation, operating, 10~90%, non-condensation, non-operating |
Shock protection | IEC 60068 2-27 |
Standards and Certifications | CE, FCC Class A |
Vibration Protection | IEC 60068 2-64 |