Easy World Automation | Nexcom NET 3140P2E-ECM EtherCAT Motion Controller

0

Nexcom NET 3140P2E-ECM EtherCAT Motion Controller

  • EtherCAT technology with NexECM, Class A EtherCAT Master
  • EtherCAT communication cycle up to 250 μs
  • Support CoE protocol
  • Support high-level API for CiA 402 profile
  • Build-in full function EtherCAT application configurator
  • Dual VGA or VGA/DVI independent display
  • 3 x RS232 and 1 x RS232/422/485 with auto direction control
  • One external locked CF socket

Description

Utilizing the Intel® GM45 chipsets, NET 3140P2E-ECM is highly scalable supporting a wide variety of Intel® Core™ 2 Duo and Celeron® processors. With pre-installed NexECM EtherCAT Master software, NET 3140P2E-ECM delivers an exceptional performance with notable stability. NET 3140P2E-ECM supports dual independent displays through 2 x VGA, DVI, or LVDS outputs. Housed in a robust aluminum chassis, its fanless design offers noise-free, ultra-reliable operation in the demanding industrial environment. NET 3140P2E-ECM offers a comprehensive and easy-to-use application configurator for system development and debugging to speed up the development period.


You can place an order for the Nexcom NET 3140P2E-ECM EtherCAT Motion Controller, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

General
I/O Interface-Rear 2-pin Remote Power on/off switch, +16 to 30VDC input, 1 x PS/2 for Keyboard/Mouse, 1 x DB25 Parallel Port (Optional GPIO or LVDS interface), 1 x DB44 Serial Port for 4 x RS232, (COM2: RS232/422/485 with Auto Flow Control), 2 x GbE LAN ports (support WoL & LAN teaming), 4 x USB 2.0 ports, 1 x DB15 VGA port, 1 x DVI-I Port (DVI-D + VGA), 1 x Line-out and 1 x Mic-in
CPU Support Support Intel® Core™ 2 Duo P8400
Main Memory 2 x 2GB DDR3 SDRAM
Chipset Intel® GM45 Graphics and Memory Controller Hub, Featuring the Mobile Intel® Graphics Media Accelerator 4500MHD, Intel® 82801IBM (ICH9M) I/O Controller Hub
Main Board Slave module no.: up to 64, Cycle time: up to 250 µs, Synchronization error: ±50ns, Support CiA 402 standard protocol
Expansion Slot Add-on card length support:, Max. 169mm x1 and 240mm x1 (with 2.5” HDD installed), Max. 240mm x2 (without 2.5” HDD installed)
Pre-Installed Software Package Operating system: Windows Embedded Standard 7, Real-time extension: , - RTX2012/RTX2016 for 32-bit OS, - RTX2014 for 64-bit OS, EtherCAT Master: NexECM, EtherCAT configurator
Device 1 x 2.5” SATA HDD drive bay, 1 x external locked CF card socket, Optional power adapter
EtherCAT Support Table Basic Features, - Service Commands: Support of all commands, NexECMRtx, - IRQ Field in Datagram: Use IRQ information from Slave in datagram header, NexECMRtx- Slaves with Device Emulation: Support Slaves with and without application controller, NexECMRtx, - EtherCAT State Machine: Support of ESM special behavior, NexECMRtx, - Error Handling: Checking of network or slave errors, e.g. working counter, NexECMRtx, Process Data Exchange, - Cyclic PDO: Cyclic process data exchange, Network Configuration, - Reading ENI: Network configuration taken from ENI file, NexECMRtx, - Compare Network: Configuration Compare configured and existing network configuration during boot-up, NexECMRtx, - Explicit Device Identification: Identification used for hot connect and prevention against cable swapping, NexECMRtx, - Station Alias Addressing: Support configured station alias in slave, i.e. enable 2nd Address and use it, NexECMRtx, - Access to EEPROM: Support routines to access EEPROM via ESC register, NexECMRtx, Mailbox Support, - Support Mailbox: Main functionality for mailbox transfer, NexECMRtx, - Mailbox polling: Polling mailbox state in slaves, NexECMRtx, CAN Application Layer Over EtherCAT (CoE), - SDO Up/Download: Normal and expedited transfer, NexECMRtx, - Complete Access: Transfer the entire object (with all sub-indices) at once, NexECMRtx, Distributed Clocks, - DC: Support of distributed clock, NexECMRtx
Interface
I/O Interface-Front ATX power on/off switch, HDD Access/Power status LEDs, 1 x Front Access CF Card Socket, 2 x USB 2.0 ports
Power Requirements
Power Requirements ATX power mode, OnBoard DC to DC power support from +16 to 30VDC
Physical Characteristics
Operating temperature Ambient with air flow: -5°C to 55°C (According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
Storage Temperature -20°C to 80°C
Dimensions 195mm (W) x 268mm (D) x 101mm (H) (7.7” x 10.5” x 3.98”)
Humidity 10% to 93% (non-condensing)
Shock protection - HDD: 20G, half sine, 11ms, IEC60068-2-27, - CF: 50G, half sine, 11ms, IEC60068-2-27
Standards and Certifications CE approval, FCC Class B
Vibration Protection - Random: 0.5Grms @ 5 ~ 500Hz according to IEC60068-2-64, - Sinusoidal: 0.5Grms @ 5 ~ 500Hz according to IEC60068-2-6

related products