MOXA ICF-1150-M-ST-T Serial to Fiber Converter
- 1 x RS-232/422/485 Serial port (DB9-F for RS-232, TB for RS-422/485)
- 1 x 100Mbps Fiber optic port (Multi-mode ST connector)
- 5 km Typical data transmission distance on fiber
- 12 to 48 VDC input power range
- IP30-rated Metal body design
- DIN-rail mounting
- -40 to 85°C operating temperature
.png)
Description
The ICF-1150 serial-to-fiber converters transfer
RS-232/RS-422/RS-485 signals to optical fiber ports to enhance transmission
distance. When an ICF-1150 device receives data from any serial port, it sends
the data through the optical fiber ports. These products not only support
single-mode and multi-mode fiber for different transmission distances, but
models with isolation protection are also available to enhance noise immunity.
The ICF-1150 products feature three-way communication and a rotating switch to
set the pull high/low resistor for onsite installation.
Three-Way Communication
The ICF-1150 Series supports 2 serial ports, with a DB9
connector for RS-232 communication and a removable terminal block for RS-422 or
RS-485 communication. The 3 ports (2 serial ports and one fiber port) are
completely independent. When an ICF-1150 converter receives data from any one
port, it will send the data through the other 2 ports. For example, once the
ICF-1150 converter receives a command from the remote master through the fiber
port, it will convert the signal and send the command through the RS-232 and
RS-422/485 ports at the same time. If the user is monitoring a system running
on an RS-485 network, there is no need to use an additional RS-232 to RS-485
converter to connect the laptop computer’s serial port to the RS-485 bus.
Rotary Switch for Setting the Pull High/Low Resistor
The RS-485 interface supports multidrop or daisy-chain
connections, which system engineers will use to connect serial devices such as
meters, RTUs, and readers, together on the same bus. Since the number of serial
devices on the same bus will cause the impedance of the data line to increase,
the ICF-1150 allows users to tune the pull high/low resistor. Just rotate the switch
to the appropriate value without removing the ICF-1150 from the DIN rail.
You can also find the ICF-1150-S-SC-T, ICF-1150-S-ST, and ICF-1150-M-SC-T models in the Industrial Media Converters.
Explore our extensive range of
industrial automation products such as MOXA ICF-1150-M-ST-T Serial to Fiber Converter in the Middle East (UAE (Dubai),
KSA (Al Khobar, Riyadh), and Oman).
Submit your inquiry to enjoy the on-time delivery service. Our sales
experts will contact you to fulfill all your industrial automation needs.
Specification
| Interface | |
|---|---|
| 100Mb Fiber optic single mode (Megabit) Ports | |
| 100Mb Fiber optic multi mode (Megabit) Ports | : 1 ST Port |
| Serial port | : 1 x RS-232/422/485 Port (DB9-F for RS-232, TB for RS-422/485) |
| USB | |
| Other ports | |
| Isolation | |
| Converter specifications | |
| Data transfer speed ( Baudrate ) | 0.05Kbps to 921.6Kbps |
| Maximum data transmission distance | 5Km on the fiber |
| Minimum output power converter | -8dBm |
| Sensitivity to receiving information | -25dBm |
| Wavelength | 850nm |
| Require cable diameter | 50/125μm, 62.5/125μm |
| Flow Control | ADDC (automatic data direction control) for RS-485 |
| Protocols | - |
| Serial Signals | |
| RS-232 Signals | TxD, RxD, GND |
| RS-422 Signals | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w Signals | Data+, Data-, GND |
| RS-485-4w Signals | Tx+, Tx-, Rx+, Rx-, GND |
| Power Requirements | |
| Power Consumption (Output Adapter) | 264 mA @ 12 to 48 VDC |
| Power Input Plugin ( Redundant ) | |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
| Input Voltage | 12 to 48 VDC |
| Input Current | 264 mA @ 12 to 48 VDC |
| Connector | Terminal block |
| General | |
| Fan / Fanless | Fanless |
| MTBF | 792,085 hour |
| Physical Characteristics | |
| Dimensions | 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in) |
| Housing | Metal |
| Installation | DIN-rail mounting |
| Operating Temperature | -40 to 85°C (-40 to 185°F) |
| Operation Humidity | 5% to %95 non-condensing |
| Standards and Certifications | EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 4 kV; Signal: 1 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF; Environmental Testing: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-3; Safety: UL 61010-2-201; Vibration: IEC 60068-2-6; Hazardous Locations: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2; IP30; Telcordia (Bellcore), GB |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Weight | 330 g (0.73 lb) |
| LED Indicators | |
| LED Per Port | |
| Power | |
