Westermo GW2304-PE4-2DI2O-QFR Industrial 4G LTE Router with PoE+ support | Easy World Automation

Westermo GW2304-PE4-2DI2O-QFR Industrial 4G LTE Router with PoE+ support

  • Industrial PoE+ LTE Router
  • 4 x 100/1000 Mbit/s, PoE+, RJ-45
  • 2 x Digital input
  • 2 x Relay contact output
  • 2 x Micro SIM card slot
  • 1 x GPS SMA female antenna connector

Description

The GW2300 Series router has been designed for remote access applications in the harshest of environments, such as unmanned roadside cabinets, railway trackside and pole-top smart grid applications over 4G. The PoE+ capability supplies up to 60W of power across the 4 Ethernet ports to power cameras with PTZ or other PoE devices. Digital I/O options make this a very versatile device for many industrial applications. 

GbE Ethernet Ports
The GW2300 Series router supports up to four 10/100/1000Mbps Ethernet interfaces. They can be configured as a single interface with Ethernet switching between them or as separate router interfaces.

PoE
The GW2300 Series supports up to four PoE ports with a total budget of 60W. The power management can allocate all the power to 2 ports for POE+ applications or spread the available power across all 4 ports depending on the power class of the connected device.

GPS Receiver
The GW2300 Series router includes a GPS receiver for positioning information, such as vehicle position in open cast mines or other application where knowing the position of the router is important. The GPS socket has a DC voltage to power an active GPS antenna.

SMS Management
The GW2300 Series router also supports SMS, so if the packet switched side of the network is down, commands can be sent to the router to perform diagnostics or even a reboot.

Ingress Protection
The GW2300 Series has been designed with rubber seals around each connector, providing an IP40 ingress protection rating.

Automatic Failover
The GW2300 can be configured to use any interface as a WAN connection. The management of the GW2304W is able to fall backwards and forwards between media interface depending on the availability.

DIN Rail Mounting
A DIN rail clip is included, which enables simple mounting for industrial applications. Optional rubber feet can be supplied for table mounting.

Centralised Management and Monitoring
The GW2300 Series router benefits from Activator, our centralised configuration management and monitoring system. Activator simplifies and automates deployment, management and support tasks in managed network environments.


You can explore our wide range of products and enquire about the Westermo GW2304-PE4-2DI2O-QFR Industrial LTE Router with PoE+ support for your industrial automation needs. Our sales experts will pave the way to buy at the lowest price in Dubai, UAE, Saudi Arabia, Oman, and the Middle East.

Specification

Interface
Memory card slot for storage
MicroUSB
SIM card slot 2 x SIM card socket with cover
WAN
LAN
USB
FXO / FXS
DSL
Digital Input and Output
Serial port
Alert Output
Radio specifications
Standards and Wireless Standards -
2G , 3G , 4G Standards _
Radio Connection type
WiFi Antenna 2 or 4 cellular antenna SMA sockets, MIMO support in LTE versions, 1 x GPS SMA female antenna connector with 3.3 Volt DC power feed for active antenna
4G / 3G / 2G Antenna _
WiFi Gain Antenna -
4G / 3G / 2G Gain Antenna -
Maximum WiFi data transfer speed -
Maximum data transfer speed of 3G _
Maximum data transfer speed of 4G _
WiFi Radio Frequency
2G network frequency -
3G network frequency -
4G network frequency -
Number of radio channels
Maximum direct range -
Maximum WiFi Output Power -
Radio Channel Bandwidth -
Software Specifications
VPN IPsec, IKE version 2, X.509 certificates, Elliptic Curve Cryptography (ECC), SHA2_512 support, PFS, SCEP, DH_8192
Firewall
WPS
Cloud computing feature
Serial performance
General
Operating mode 4G LTE Router with PoE+ support
Management Automatic configuration using Activator server, HTTP/HTTPS browser access, Command Line Interface via SSH, SNMP agent, SMS management support enables SMS control including reboot
Standards and protocols
Protocols IEC 60870-5-104, IEC 60870-5-101, IEC 61850, Modbus RTU, Modbus TCP, Modbus RTU to TCP automatic conversion, DNP3
Serial port standard
Features and capabilities
3G phone calls -
Create and edit phonebook -
Send and receive SMS -
Security
Security and Encryption -
Authentication -
Serial security
SSID -
Power Requirements
Power Consumption (Output Adapter)
POE Support
Battery
Type of power input -
Buttons
Power button
3G / WAN button
WPS button
Reset
LED Indicators
Phone
SMS
WLAN
3G / 2G -
WAN
LAN -
Power : 20-60V DC isolated input (default), PoE support with input voltage over 44V, PoE+ support with input voltage over 50V
Internet -
Wireless Signal Strength
WPS
Physical Characteristics
Dimensions
Weight -
Operating Temperature -40°C to +70 °C
Storage Humidity -
Storage Temperature -
Type of Use Industrial environment
Standards and Certifications CE RED, EN 60950 safety approval, EN 55022 and EN 55024 EMC, EN 300 328 V1.9.1, Freefall drop test to EN60068-2-32:2008, Bump test to EN60068-2-27:2009, Random vibration test to EN60068-2-64:2008, Mechanical shock test to EN60068-2-27:2009
Optical isolation