Westermo GW2304-PE4-2DI2O-QFR Industrial 4G LTE Router with PoE+ support
- Industrial PoE+ LTE Router (LTE Cat-4)
- 4 x 100/1000 Mbit/s Ports (PoE+, RJ-45)
- 2 x Micro SIM Card sockets with optional slot cover
- IP41-rated Rugged aluminium enclosure
- 20-60V DC isolated input (44V at PoE, 50V at PoE+)
- DIN-rail mount installation design
- -40 to +70 °C operating temperature range
.png)
Description
The GW2300 Series router has been designed for remote access applications in the harshest of environments, such as unmanned roadside cabinets, railway trackside, and pole-top smart grid applications over 4G. The PoE+ capability supplies up to 60W of power across the 4 Ethernet ports to power cameras with PTZ or other PoE devices. Digital I/O options make this a very versatile device for many industrial applications.
GbE Ethernet Ports
The GW2300 Series router supports up to four 10/100/1000Mbps Ethernet interfaces. They can be configured as a single interface with Ethernet switching between them or as separate router interfaces.
PoE
The GW2300 Series supports up to four PoE ports with a total budget of 60W. The power management can allocate all the power to 2 ports for POE+ applications or spread the available power across all 4 ports depending on the power class of the connected device.
GPS Receiver
The GW2300 Series router includes a GPS receiver for positioning information, such as vehicle position in open cast mines or other application where knowing the position of the router is important. The GPS socket has a DC voltage to power an active GPS antenna.
SMS Management
The GW2300 Series router also supports SMS, so if the packet-switched side of the network is down, commands can be sent to the router to perform diagnostics or even a reboot.
Ingress Protection
The GW2300 Series has been designed with rubber seals around each connector, providing an IP40 ingress protection rating.
Automatic Failover
The GW2300 can be configured to use any interface as a WAN connection. The management of the GW2304W is able to fall backwards and forwards between media interface depending on the availability.
DIN Rail Mounting
A DIN rail clip is included, which enables simple mounting for industrial applications. Optional rubber feet can be supplied for table mounting.
Centralised Management and Monitoring
You can also find the GW1042W-X-QFR-DCi0936, GW1042M-QFR-DCn0936, and GW1042M-X-QFR-DCn0936 models in the Wireless Routers.
You can explore our wide range of products and enquire about the Westermo GW2304-PE4-2DI2O-QFR Industrial 4G LTE Router with PoE+ support support for your industrial automation needs. Our sales experts will pave the way to buy at the lowest price in Dubai, UAE, Saudi Arabia, Oman, and the Middle East.
Specification
| Interface | |
|---|---|
| SIM card slot | : 2 x Micro SIM card slots |
| Ethernet Ports | : 4 x 100/1000 Mbit/s Ports (PoE+, RJ-45) |
| USB | |
| Digital Input and Output | : 2 x Digital inputs, 2 x Relay contact outputs (30V DC 1A) |
| Serial port | |
| Alert Output | : 2 x Relay contact outputs |
| Band Options | - |
| Cellular Standards | LTE, 3G, 2G |
| Cellular Antenna Connectors | 2 or 4 cellular antenna SMA socket |
| WLAN Standards | - |
| WLAN Antenna Connector | |
| GPS Antenna Connector | 1 x SMA female antenna connector with 3.3 Volt DC power feed for active antenna |
| Radio specifications | |
| Radio Connection type | Cellular (LTE/3G/2G) |
| Maximum data transfer speed of 2G | - |
| Maximum data transfer speed of 3G | - |
| Maximum data transfer speed of 4G | - |
| WiFi Radio Frequency | - |
| Software Specifications | |
| Routing Redundancy | |
| VPN | IPSec/L2TPv2/L2TPv3/GRE, DMVPN, Open VPN |
| Firewall | NAT, Port Forwarding, Packet filtering |
| Time Management | |
| Management | Automatic configuration using Activator server, HTTP/HTTPS browser access, Command Line Interface via SSH, SNMP agent, SMS management support enables SMS control including reboot |
| General | |
| LED Indicators | Booting up, Power LED, Config LED, SIM1 & SIM2 LEDs, 3G/LTE Cellular Signal Strength LEDs, DSL SYN, DSL DAT, LINK LED |
| MTBF | - |
| Operating mode | LTE Router |
| Standards and protocols | |
| Protocols | IPv4 and IPv6, DHCP server & client, DynDNS, NAT, NAT Traversal, NTP Client, VLAN support, Packet filtering, Firewall, Port forwarding, BGPv4, OSPF and RIP, IPSec/L2TPv2/L2TPv3/GRE, DMVPN, SNMP v1/v2/v3,TLS 1.2, 802.1x authenti cation, IEC 104, QoS, VRRP,VRF, Open VPN |
| Features and capabilities | |
| Send and receive SMS | |
| Security | |
| Security and Encryption | - |
| Authentication | 802.1x authentication |
| Power Requirements | |
| Power Connector | - |
| Power Consumption (Output Adapter) | - |
| Input Voltage | 20-60V DC isolated input (default), PoE support with input voltage over 44V, PoE+ support with input voltage over 50V |
| POE Support | |
| Input Current | - |
| Reverse Polarity Protection | - |
| Buttons | |
| Power button | |
| Reset | |
| Physical Characteristics | |
| Installation | DIN rail mounting |
| Dimensions | 50W 125D 170H mm |
| Housing | Aluminum |
| Weight | 500g |
| Operating Temperature | -40 to 70 ° C |
| Storage Humidity | - |
| Storage Temperature | -40 to 70 ° C |
| Type of Use | Industrial applications in harsh environments |
| Standards and Certifications | CE RED, EN 60950 safety approval, EN 55022 and EN 55024 EMC,EN 300 328 V1.9.1, Freefall drop test to EN60068-2-32:2008, Bump test to EN60068-2-27:2009, Random vibration test to EN60068-2-64:2008, Mechanical shock test to EN60068-2-27:2009; IP41 |
