MOXA ICF-1150I-M-ST Serial to Fiber Converter
- Serial to multimode fiber optic converter
- 1 ST fiber-optic port and 2 RS-232/422/485 serial ports
- 2KV Electrostatic Discharge Protection
- Power Input 12V DC to 48V DC
- Support for ring topologies or point-to-point
- Brand: MOXA
- Product Code: ICF-1150I-M-ST
Description
The ICF-1150 serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance the transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, but models with isolation protection are also available to enhance noise immunity. The ICF1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.
You can also find the ICF-1150-M-ST-T, ICF-1150-M-SC-T, and ICF-1150I-S-ST-T models in the Industrial Media Converters.
Experience the convenient way to purchase the MOXA ICF-1150I-M-ST Serial to Fiber Converter in the
Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman). Our sales experts
will provide the most helpful information about the price and sale conditions
for a wonderful buying experience.
Specification
Converter specifications | |
---|---|
Data transfer speed | 0.05Kbps to 921.6Kbps |
Maximum data transmission distance | 5Km |
Minimum output power converter | -5dBm |
Sensitivity to receiving information | -20dBm |
Wavelength | 850nm |
Power Requirements | |
Maximum power consumption | - |
Power Consumption (Output Adapter) | 12V DC, 0.163A to 48V DC |
Power Input Plugin ( Redundant ) | |
Standards and protocols | |
Point-to-point topology | Half-duplex pr full-duplex |
Ring topology | Half-duplex |
RS-232 Signals | TxD, RxD, GND |
RS-422 Signals | TxD+, TxD-, RxD+, RxD-, GND |
RS-485-2w Signals | Data+, Data-, GND |
Interface | |
10/100Mb RJ45 (Megabit) Ports | |
100Mb Fiber optic single mode (Megabit) Ports | |
10/100/1000Mb (Gigabit) POE Ports | |
100Mb Fiber optic multi mode (Megabit) Ports | : 1 ST Port |
10/100/1000Mb RJ45 (Gigabit) Ports | |
1000Mb SFP Fiber optic (Gigabit) Ports | |
100Mb SFP Fiber optic (Megabit) Ports | |
Number of 10/100Mb PoE port | |
USB | |
DSL | |
Serial port | : 2 RS-232/422/485 Ports |
Other ports | |
General | |
Fan / Fanless | |
MTBF | 792,085 hour |
Require cable diameter | 50/125μm, 62.5/125μm |
Physical Characteristics | |
Dimensions | 30.3x70x115mm |
Housing | Metal |
Installation | Din-rail |
Isolation | : 2KV |
Operating Temperature | 0 to 60 ° C |
Operation Humidity | - |
Operation Humidity | 5% to %95 non-condensing |
Protection against excessive consumption | : 1.1A |
Protection against reverse flow | |
Standards and Certifications | Safety: UL 508; Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2 EEx nC IIC, IECEx; EMC: EN 55032/24; EMI: CISPR 32, FCC Part 15B Class B; EMS: EN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV, EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m, EN 61000-4-4 (EFT): Power: 4 kV; Signal: 2 kV, EN 61000-4-5 (Surge): Power: 4 kV; Signal: 0.5 kV, EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m, EN 61000-4-8 (PFMF); Green Product: RoHS, CRoHS, WEEE; Freefall: IEC 60068-2-32; Standard: Telcordia (Bellcore), GB; Water and Dust Proof: IP30 |
Storage Temperature | -40 to 85 ° C |
Weight | 0.33Kg |
LED Indicators | |
LED Per Port | |
Power | |
Package Checklist | |
Hardware installation guide | |
Power adapter | |
Power cable |