DNWP FlexiNT-GS Lite Network Terminals and Multiplexers

  • 1 x RJ-45; async; V.110; sampling nx64 kbit/s
  • 2 x RJ-45;10/100Base-T; full/half duplex/auto-negotiation; EoT
  • 40.5…57 VDC; AC with AC/DC converter
  • -25 …+55 °C Operating Temperature


FlexiNT-GS devices provide different ways of deploying Ethernet, TDM, and low-speed serial data services over SHDSL.bis local loops or TDM networks. They deliver services over a local loop using SHDSL.bis line code with speeds of up to 5.7 Mbit/s over a single copper pair. With bonded SHDSL.bis, it is possible to deliver 22.8 Mbit/s split over four copper pairs.

FlexiNT-GS devices can be used as TDM multiplexers or interface converters where serial, Ethernet, and E1 interfaces can be converted or multiplexed to an E1 interface. FlexiNT-GS devices can also work in a box-to-box configuration and act as network terminals (Customer Premises, CP mode) and line terminals (Central Office, CO mode). In addition, FlexiNT-GS devices can function as network terminals for DSL Access Multiplexer (DSLAM) and carry Ethernet over a local loop using EFM or ATM mode.

FlexiNT-GS Lite is a modernized version of the standard FlexiNT-GS network terminal and multiplexer that provides all of the most requested interfaces.

You can place an order for the DNWP FlexiNT-GS Lite Network Terminals and Multiplexers online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.


Serial V/X interfaces 2 x SSC; V.11/X.21/V.35/V.28; sync/async; V.110 and nx64 kbit/s
Serial RS485 interface 1 x RJ-45; async; V.110; sampling nx64 kbit/s
E1 TDM interfaces 2 x RJ-45; symmetrical 120 ohm; G.703/G.704
Fast Ethernet interfaces 2 x RJ-45;10/100Base-T; full/half duplex/auto negotiation; EoT
Local management interface 1 x RJ-45; V.11 or V.28
Line interface Surge protection: 1.5kV according to ITU-T Rec. K.45 600V RMS common mode according to ITU-T Rec. K.45
Power Requirements
AC power supply Surge protection: 2kV according to ITU-T Rec. K.45
DC power supply Surge protection: 1.0kV according to EN61000-4-5
MTBF 54 years
Physical Characteristics
Dimensions 280 x 32 x 160 mm
Mechanical construction Standalone box
Weight 1.3 kg
Mounting Wall and rail mounting
Operating Power 40.5…57 VDC; AC with AC/DC converter
Power Consumption 9 W
Indoor application IP21 (Ingress Protection 21)
Transport ETSI ETS300019-1-2 class 2.3
Storage ETSI ETS300019-1-1 class 1.2
Operation ETSI ETS300019-1-3 class 3.3
Operating Temperature -25…+55 °C
EMC EN 300 386 V1.6.1:2012
Safety IEC 60950-1:2005 (2nd Edition)