Westermo TR-36B Industrial PSTN/Leased Line Modem | Easy World Automation

Westermo TR-36B Industrial PSTN/Leased Line Modem

  • Industrial Rack-Based Modem
  • Connected to rack RV-07B
  • RV07B 19” rack installation design
  • 12 to 48 VDC input power (Wide Range 10 to 60 VDC)
  • –40 to +70ºC operating temperature range

Description

The TR-36B is an industrial rack-based modem designed to allow cost-effective and simple remote access to legacy serial industrial equipment. The AT command-driven modem is capable of synchronizing with a wide range of traditional modem negotiation standards, providing data rates up to 33.6 kbit/s over both PSTN and 2- or 4-wire leased line circuits. Designed to be mounted in the RV-07B rack in industrial locations, these modems can operate in extremes of temperature and electromagnetic fields. The complete galvanic separation of all interfaces ensures earth loops and transients do not interfere with communication. Up to 16 TR-36B modems can be mounted in one rack.

Firewalls are not an issue as data does not use the Internet. With call-back security, it is impossible for either accidental or deliberate access to any equipment attached to the modem. To provide resilience, a second line interface allows a PSTN connection to be established in the event of a leased line failure. The modem is also simple to configure using the Westermo TD-tool software; standard commands can easily be entered, and saved configurations downloaded. RS-232 connections can be made using screw connections as well as the standard D-sub. The modem is designed to be connected to devices with no ability to control dialling, so special functions like data dialling and DTR dialling are provided to enable these devices to automatically establish a connection.


End of Life Product - No Replacement

Please note that the TR-36B has been phased out. You can explore other types of modems in the Modems.


Discover industrial automation solutions appropriate to your needs, and easily inquire about the Westermo TR-36B Industrial PSTN/Leased Line Modem through our user-friendly website via one of our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman). 

Specification

Interface
SIM card slot
Ethernet Ports
USB
Digital Input and Output
Serial port
Alert Output
Band Options -
Cellular Standards -
Cellular Antenna Connectors
WLAN Standards
WLAN Antenna Connector
GPS Antenna Connector
Radio specifications
Radio Connection type -
Maximum data transfer speed of 2G -
Maximum data transfer speed of 3G -
Maximum data transfer speed of 4G -
WiFi Radio Frequency -
Software Specifications
Routing Redundancy -
VPN -
Firewall -
Time Management -
Management -
General
LED Indicators TD, RD, RTS, DCD, DTR, REL, LINE, PWR
MTBF MIL C217F2: 676000 h @ 25ºC
Operating mode Industrial Rack Modem
Standards and protocols
Protocols -
Features and capabilities
Send and receive SMS
Security
Security and Encryption
Authentication
Power Requirements
Power Connector 32-pin Europe connector
Power Consumption (Output Adapter) 2W
Input Voltage 12 to 48 VDC (Wide Range 10 to 60 VDC)
POE Support
Input Current 130 mA @ 12 VDC, 63 mA @ 24 VDC, 40 mA @ 48
Reverse Polarity Protection Supported
Buttons
Power button
Reset
Physical Characteristics
Installation RV07B 19” rack
Dimensions 20 x 100 x 175 mm (0.78 x 3.93 x 6.88 in)
Housing -
Weight 0.14 kg
Operating Temperature –40 to +70ºC (–40 to +158°F)
Storage Humidity 5 to 95% relative humidity
Storage Temperature –40 to +70ºC (–40 to +158°F)
Type of Use Industrial environment
Standards and Certifications Ingress protection: IP20; MIL C217F2; EMC: EN 61000-6-2, Immunity industrial environments, EN 55024, Immunity IT equipment, EN 61000-6-4, Emission industrial environments, FCC part 15 Class A, EN 50121-4, Railway signalling and telecommunications apparatus, IEC 62236-4, Railway signalling and telecommunications apparatus; Safety: EN 60950-1, IT equipment; PSTN: ETSI TS103 021-1, ETSI TS103 021-2, ETSI TS103 021-3